Difference between revisions of "Cables & terminations"

From LinnDocs
Jump to: navigation, search
m (XLR)
m
Line 1: Line 1:
 +
__NOTOC__
 
The <i><u><b>typical</i></u></b> termination standard between Linn products are:
 
The <i><u><b>typical</i></u></b> termination standard between Linn products are:
 
<br>
 
<br>
{{footer:3
+
{{footer:4
 
| [[#RCA/Phono|RCA/Phono]]
 
| [[#RCA/Phono|RCA/Phono]]
 
| [[#XLR|XLR]]
 
| [[#XLR|XLR]]
 
| [[#SPDIF|SPDIF]]
 
| [[#SPDIF|SPDIF]]
| [http://www.linn.co.uk/support Contact us]
+
| [[#Exakt_Cables|Exakt link]]
 
<!-- Add History-->
 
<!-- Add History-->
 
}}
 
}}
Line 93: Line 94:
 
|}
 
|}
 
<br>
 
<br>
 +
= Exakt Cables =
 +
{{Info:Exakt-Cables}}
 +
 +
== EXAKT LINK terminations ==
 +
{{Info:Exakt-link_Terminations}}

Revision as of 12:58, 2 September 2019

The typical termination standard between Linn products are:

RCA/Phono

     Inputs

Input sensitivity: Selectable: 1 / 2 / 4 Vrms

Input impedance: typically 10 kΩ


     Outputs
Analogue Output: 2 Vrms

Output Impedance: 300 Ω

RCA Output Coupling: Transformer - Klimax DS/1 onwards and all Klimax DSM


Direct - all other products

XLR

     Inputs

Input sensitivity: Selectable: 2 / 4 / 8 Vrms

Input impedance: 7.8kΩ

XLR Coupling: Direct (some Klimax products have the option of Transformer or Direct)


     Outputs
Analogue Output: 4 Vrms

Output Impedance: 300 Ω
XLR Output Coupling: Direct - Majik/Akurate/Selekt


Transformer - Klimax



XLR pin outs
XLR Pin outs.png




1 - Sheild
2 - HOT (white)
3 - COLD (Blue)







Converting XLR to/from Phono/RCA

XLR to Phono.png

SPDIF

     Inputs

Input voltage 0.3V (when terminated with 75Ω )

Input impedance: 75Ω


     Outputs

Min Input voltage 0.5V rms (when terminated with 75Ω )

Input impedance: 75Ω


Exakt Cables

ALL FOUR pairs of the cables are used in the Exakt-Link cable. This is NOT an ethernet transport cable but an Exakt transport cable. These pairs are used to transmit the audio data, power triggers and a master timing control to ensure that the audio from all channels are in perfect sync.

The Exakt-link has been designed to operate with the CAT-5 cable electrical specifications for signal timings. There have been NO changes to this design for any other CAT cable standards. (updated 2019)

We recommend using the 100Base-T4 / 568B ethernet cable pairing
Exakt Link uses readily available network cables:
  • CAT 5/5e UTP/FTP
  • CAT 6/6a UTP/FTP
Note: There is no change in the audio performance of the Exakt Link between Cat 5 or Cat 6 Cables.


Cat-7 and Cat-8 cables may not work well with an Exakt system. For a trouble-free, reliable, high performance installation, we recommend use of Cat 5 or Cat 6.


Typical Ethernet 100Base-T length restrictions guide:

Patch cable < 30M
Solid core cable < 100M


EXAKT-LINK CANNOT be used with:

  • Ethernet Network Routers,
  • Ethernet Network Switches,
  • Ethernet Isolators,
  • Ethernet conditioners,
  • HomePlugs/Ethernet-over-Mains devices
  • WLAN bridges etc

Exakt-Link can ONLY be a CAT5/6 cable from Exakt socket to Exakt socket

EXAKT LINK terminations

  • The cables are paired up using OUT > IN style connections.
  • Any Linn product with these sockets can be linked together. This means you can link a Klimax DS/2 to a Majik ExaktBox-I and have a fully working Exakt system



Exakt-Connections-link.jpg