Difference between revisions of "Akurate DSM"

From LinnDocs
Jump to: navigation, search
(Manuals)
(Front Panel Connections)
Line 57: Line 57:
 
== '''Front Panel Connections''' ==
 
== '''Front Panel Connections''' ==
  
[[Image:AkurateKontrolFront.png|center|750px]]
+
[[Image:Akurate_DSM_Front.jpg|center|750px]]
  
 
# '''MUTE BUTTON''' - Mutes/unmutes the audio
 
# '''MUTE BUTTON''' - Mutes/unmutes the audio

Revision as of 10:54, 13 October 2011

AkurateKontrolFrontTop.jpg

Product info

  • Product Name: Akurate DSM
  • Date of Introduction: November 2011
  • Type: Integrated Digital Music player and Pre-amplifier

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Generic Safety Information

On-line warranty registration

Network Setup

Back Panel Connections

Akurate DSM rear2.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  3. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  4. ETHERNET - To connect to a network.
  5. ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.
  6. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) outputs.
  7. ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
  8. PHONO GROUND - To connect to a turntable grounding terminal.
  9. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier with balanced (XLR) inputs.
  10. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
  11. ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.


Front Panel Connections

  1. MUTE BUTTON - Mutes/unmutes the audio
  2. VOLUME ADJUST BUTTONS - Changes the volume up/down
  3. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  4. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  5. SOURCE SELECT BUTTONS - Changes to the previous/next source
  6. STANDBY BUTTON - Brings the unit in/out of standby
  7. POWER SWITCH- Switches the power on/off
  8. FRONT PANEL DISPLAY


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Akurate DSM.
  • Positioning - Please read the information on positioning your Akurate DSM.


For further assistance, try our customer support pages or the Linn Forum.