Difference between revisions of "Akurate DSM"

From LinnDocs
Jump to: navigation, search
(Back Panel Connections)
(Back Panel Connections)
Line 51: Line 51:
 
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
 
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
 
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
 
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
 +
# '''SPDIF INPUTS'''
 +
# '''SPDIF OUTPUT'''
 +
# '''TOSLINK INPUTS'''
 +
# '''TOSLINK OUTPUT'''
 +
# '''HDMI INPUTS'''
 +
# '''HDMI OUTPUT'''
 
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
 
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
  

Revision as of 11:20, 13 October 2011

AkurateKontrolFrontTop.jpg

Product info

  • Product Name: Akurate DSM
  • Date of Introduction: November 2011
  • Type: Integrated Digital Music player and Pre-amplifier

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Generic Safety Information

On-line warranty registration

Network Setup

Back Panel Connections

Akurate DSM rear2.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  3. ETHERNET - To connect to a network.
  4. ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.
  5. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) outputs.
  6. ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
  7. PHONO GROUND - To connect to a turntable grounding terminal.
  8. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier with balanced (XLR) inputs.
  9. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
  10. ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
  11. SPDIF INPUTS
  12. SPDIF OUTPUT
  13. TOSLINK INPUTS
  14. TOSLINK OUTPUT
  15. HDMI INPUTS
  16. HDMI OUTPUT
  17. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.


Front Panel Connections

Akurate DSM front.jpg
  1. MUTE BUTTON - Mutes/unmutes the audio
  2. VOLUME ADJUST BUTTONS - Changes the volume up/down
  3. SOURCE SELECT BUTTONS - Changes to the previous/next source
  4. SLEEP BUTTON - Brings the unit in/out of sleep mode
  5. FRONT PANEL DISPLAY
  6. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  7. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  8. POWER SWITCH- Switches the power on/off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Akurate DSM.
  • Positioning - Please read the information on positioning your Akurate DSM.


For further assistance, try our customer support pages or the Linn Forum.