Akurate DS

From LinnDocs
Revision as of 16:53, 29 October 2009 by AlisonT (talk | contribs)
Jump to: navigation, search
AkurateDS Silv 3Q cropped.jpg

Product info

  • Product Name: Akurate DS
  • Date of Introduction: November 2007
  • Type: Digital Stream Player.

Latest software

Latest software releases

Open source software

Manuals

Kinsky Desktop manual

Linn Konfig manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Recommended DS Network setup guide


Back Panel Connections

Image:Akurate_DS_rear_v2.jpg


  1. POWER SWITCH- For switching the power to the unit on and off
  2. MAINS INPUT - For connection to the mains supply.
  3. EARTH GROUND - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  4. ETHERNET - For connecting the unit to the Internet router.
  5. FALLBACK - Used when reprogramming the unit.
  6. RS232 PORTS - For connection to Linn source products without ethernet ports.
  7. BALANCED RIGHT, LEFT - Balanced audio outputs for connection to a pre-amplifier.
  8. ANALOGUE AUDIO OUTPUTS - Line level analogue audio output for connection to a pre-amplifier.

Front Panel Connections

Akurate DS front.jpg
  1. MUTE BUTTON - Mutes and un-mutes the volume
  2. FRONT PANEL DISPLAY
  3. STANDBY BUTTON - Brings the unit out of, or puts into, standby
  4. VOLUME -/+ - Adjust the volume level
  5. SOURCE -/+ - Changes Sources

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Akurate DS.
  • Positioning - Please read the information on positioning your Akurate DS.


For further assistance, try our customer support pages or the Linn Forum.