Template:Setup:Kustom DSM:Konfig

From LinnDocs
Jump to: navigation, search

The <FACTORY DEFAULT> of the Kustom DSM has no Streamers attached to no Zones.
1.Go into Konfig and Select you Kustom DSM followed by the ZONE tab. This will show, (for a Z8):

Default Konfig.png



2.You can then edit which Streamer will feed which Zone. REBOOT after the configuration has been selected to apply changes

Konfig Stream-Zone setup.png



3. Click on the Arrow at the Kustom DSM to expand/contract the Stream and Zone devices. You can change the names and settings of each Stream and Zone.

NOTE
  • DO NOT HAVE THE STREAMER NAME THE SAME AS ANY ZONE NAME. THIS CAN CAUSE ERRATIC OPERATION OF THE CONTROL SOFTWARE (Kazoo, Linn App, Crestron, Control4...)
  • After REBOOT, any Streamers that are not connected to any Zones are invisible all control interfaces, (Kazoo, Linn App, Control4 etc)
Konfig KusDSM expanded.png


Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Template:Setup:Kustom_DSM:Konfig&oldid=26077"