Majik DSM

Product info

• Product Name: Majik DSM

• Date of Introduction: April 2012

• Type: Integrated digital music player, preamplifier and power amplifier

• Features
  • DS Design
  • Chakra Power
  • Dynamik Power Supply
  • Aktiv Operation
  • Source Unity Gain option

Latest software

Latest software releases

Open source software

Manuals

Quickstart Guide (DSM)

Quickstart Guide (DS-I)

Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Kinsky Jukebox manual

Safety Information

Warranty Terms & Conditions

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Back Panel Connections

1. MAINS INPUT - To connect to the mains electricity supply.
2. HDMI INPUTS - To connect sources with HDMI outputs.
3. HDMI OUTPUT - To connect to a display device with HDMI inputs.
4. EARTH GROUND - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
5. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
6. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
7. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
8. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
9. SPEAKER OUTPUTS - To connect to loudspeakers
10. ETHERNET - To connect to a network.
11. FALLBACK - To put the device into Fallback mode (used when reprogramming)
12. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
13. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
14. ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.

Front Panel Connections

1. POWER SWITCH- Switches the power on/off.
2. MUTE BUTTON - Mutes/unmutes the audio
3. FRONT PANEL DISPLAY
4. STANDBY BUTTON - Brings the unit in/out of standby
5. VOLUME ADJUST BUTTONS - Changes the volume up/down
6. HEADPHONE OUTPUT (3.5mm stereo) - To connect to headphones
7. AUXILIARY SOURCE INPUT (3.5mm stereo) - To connect to an analogue stereo audio source
8. SOURCE ADJUST BUTTONS - Changes to the previous/next source

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking Information

• Positioning Information

• Amplifier Protection

• Configurable Phono Stage

For further assistance, try our customer support pages or the Linn Forum.