REM 020
Operation with Linn DSM
The following functionality is available on Linn DSM devices with Infra-Red (IR) control. If IR is not currently enabled on the Linn DSM then this can be done via Linn Konfig.
To Enable IR
- Open Linn Konfig
- Select the Linn DSM
- Select the Configuration tab
- Set Handset Commands Accepted to All, Dvd or Cd depending on user requirement
Basic Functions
- SLEEP - Will put the unit into / out of Sleep mode.
- NUMERICAL KEYS - Numerical input.
- # - Press and hold for 2 seconds for HELP information.
- * - No function.
- NAVIGATION / SELECT - Up / down / left /right
- / enter keys for playlist navigation.
- DS SOURCE SELECTION - For switching between "songcast",
- "playlist" and "radio" sources on your DSM.
- INPUT SOURCE SELECTION - Direct source selection buttons,
- see below for default settings and how to change them.
- TRANSPORT CONTROLS - Play, pause, skip forward, skip back.
- MUTE - To mute / unmute volume.
- VOLUME + , - - Volume + , -.
- SOURCE + , - - Source + , -.
- INFORMATION - changes information displayed on the DSM
- front panel
- Press and release - toggles different display modes
- Press and hold scrolls title / artist / album information
Direct Source Selection
The default settings for the direct source selection buttons is shown below.
| Product | Source 1 | Source 2 | Source 3 |
| Klimax DSM | hdmi 1 | hdmi 2 | hdmi 3 |
| Akurate DSM | hdmi 1 | hdmi 2 | hdmi 3 |
| Majik DSM | tos 1 | tos 2 | tos 3 |
| Akurate Kontrol | ana 1 | ana 2 | ana 3 |
| Sekrit DSI | ana | spdif | tos |
These settings can be changed either with the handset or using Linn Konfig.
Using the handset
- On the DSM, go to the source that you want the remote button to select.
- Press and hold the chosen source button on the handset until the DSM displays ????
Using Linn Konfig
- Open Linn Konfig and select the unit you want to update
- Open the Configuration tab
- Scroll down to the section Slimline Handset
- Highlight the Input button you wish to change and then select the source from the drop down list.
Does this need to be re-booted?
