MS SelektEd Subout

From LinnDocs
Revision as of 07:28, 3 July 2024 by Yoda (talk | contribs) (Created page with ": This is for use with Stereo playback only. If you have a Selekt cartridge configured for LFE Surround and your Subwoofer has two inputs, you can fed one input from the LFE o...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
This is for use with Stereo playback only. If you have a Selekt cartridge configured for LFE Surround and your Subwoofer has two inputs, you can fed one input from the LFE output and the other Sub-woofer input from the SUBOUT output.
MS SelektEditionSubwoofer.png
Subwoofer
Options:
* ENABLED to enable these back panel outputs.
* DISABLED to disable these back panel outputs.


Subwoofer Filter
  • Enabled SUBOUT L+R set by crossover frequency 60Hz, 80Hz, 120Hz .
  • Disabled SUBOUT L+R crossover frequency 1kHz, the LHC/RHC audio is flat.


Subwoofer Crossover Frequency
If Subwoofer filter is enabled:
  • 60 Crossover frequency 60Hz
  • 80 Crossover frequency 80Hz
  • 1200 Crossover frequency 120Hz


Subwoofer Crossover Type
  • Bass redirect Audio above the Subwoofer Crossover Frequency frequency is sent to the F+R cartridge(s) and Exakt speakers. (Audio below this frequency is redirected to the SUBOUT outputs.)
  • Bass Reinforcement Audio to the F+R cartridge(s) and Exakt speakers is flat response..


Subwoofer Channels
  • Mono L+R subwoofer combined into one output.
  • Stereo separate LHC and RHC subwoofer outputs