Troubleshooting:360 PWAB

No audio from the Bass loudspeaker

The 360 PWAB takes it feed from either the 4 mm Upper Bass terminals or the XLR or XLR socket. If you have not sound, check that the 360 switch is set for the correct input.

The 360 speaker also has a set of covered Exakt sockets to enable the Aktiv Bass amplifier to be driven as an Exakt device. If the 360 PWAB is powered on with the Exakt link connected, it will think it is in Exakt mode and will not process any analogue audio. Unplug the Exakt link from the 360 loudspeaker, power cycle the loudspeaker and analogue bass audio will return.