TroubleShooting:Selekt DSM

Selekt DSM issues

Selekt DSM does not product any sound/music from the cartridge(s)

Using Konfig

1. Make sure that your Selekt DSM is powered on and your LAN network has Ethernet access

2. In Konfig, select your DSM and go into the Exakt or Speakers tab

a) In the Speakers configuration box select the FALLBACK button. This will put the Selekt cartridge backplane into software FALLBACK mode.

b) After a few moment press the RESTORE button on the Speaker configuration page.

c) Let it go through its steps.

3. When it's finished, power cycle the Selekt, set up the speaker info and see if normal operation has returned. If not please contact Linn Helpline