Template:Setup:Series3-Wifi

This is to setup the Wifi connection using the front panel buttons.

		WPS WIFI Setup procedure:
		1. On your ISP Router, press the WPS button to start the connection process.
		* Check your Router manual on how start WPS pairing.
		2. On the Series3-301 , press and HOLD buttons & until the volume indicators start moving to show a scan. (More detail of the buttons and location can be found HERE
		3. This process is complete when the Series3-301 volume indicators are all illuminated for a few seconds and return back to volume level display.

Or

	Alternative Wifi Setup Method via Web Browser:
	1. With the Series3-301 DSM out of Sleep mode
	2. Go to the Wireless settings on your device (e.g. iPad)
	3. Find the Series-301 on the list of available networks. It will be called Series3- <serial number>
	4. Select this as the wireless network on your device (e.g. iPad)
	5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
	6. The Series3 Wifi Setup page should now be displayed (if you get a "..cannot find the server” error then you have not selected to Series3 Wifi channel in point 3&4)
	7. Select the Wifi network you want to connect to
	8. Enter the passkey for the Wifi network
	9. Click on 'Set Network'

Note: To CLEAR/REMOVE any Wifi settings On the Series3-301 , press and HOLD buttons , & for 2 seconds and this will forget your Wifi settings.