Configuration:Change Configuration
Change Configuration
Select Mode
This is depends on the Exakt product you are configuring.
- Typically you will have:
- Mono: To work as an Exakt crossover for one loudspeaker
- Stereo: To work as an Exakt crossover for a pair of loudspeakers
- Stereo Passthrough: ONLY for Selekt DSM. This will allow each cartridge to Play the same stereo audio channels with no crossover filtering.
- Surround Passthrough: This defines the Surround channels assigned and what loudspeaker
Selekt Speaker
- Channel: This refers to the audio channel for this/these loudspeakers.
- If you have set for Mono mode above, this will show single channels, FL, FR, Cen...
- All other modes will allow to setup for channels pairs and single channels.
- Manufacturer: This is the Manufacturer of the speaker attached to the defined channel. E.g. Linn
- Model:This is the model of the speaker attached to the defined channel. E.g. Klimax 350
- (In Mono & Stereo mode this is used for the Exakt crossover profile.
- In Stereo Passthrough & Surround Stereo mode this is used for Space Optimisation and speaker distancing.)
- Channel: This refers to the audio channel for this/these loudspeakers.
- In Surround Passthrough mode it will then ask you if you want to add more loudspeakers for more Surround channels
- The > X</bog> allows you to delete these channels from the configuration.
