AMS Upgrade procedure

Performing the upgrade

This should ONLY be performed by Registered Linn Retailers

• Create a CD-ROM from the rkrsv410-5.iso file (http://products.linn.co.uk/VersionInfo/Downloads/AkurateMusicServer_0101.iso )
  
• Turn the AMS( Akurate Music Server )off.
• Connect a monitor and keyboard to the AMS.
  
• Turn ON the AMS and insert the CD-ROM into the AMS drive. This will begin the auto install .
  
• You will be prompted to press I for a clean install. For the serial number leave blank ,press return, and then Y
  
• The install will now begin and take a few minutes the CD-ROM will eject when complete.
  
• Leave the AMS for another 10-15 minutes and use the KivorGUI or Internet explorer to check status.
• Access the AMS web interface by typing the unit's IP address into a web browser
  
• Click on the “Network and Device Configuration”
• Verify the settings. If you make any changes hit the SAVE button
• Installation of the Rekursive Software is now complete.