Selekt DSM

Product info

• Product Name: Selekt DSM

• Date of Introduction: September 2018

• Type: Integrated digital music player and preamplifier

• Versions:

• • Selekt DSM with Line-level analogue outputs module
  • Selekt DSM with internal power ampliifer module
  • Selekt DSM with KATALYST Line-level analogue outputs
  • Selekt DSM with KATALYST internal power ampliifer module

• Features
  • Katalyst DAC Architecture
  • DS Design
  • Dynamik Power Supply

Support

Linn Support Site

Latest software

Latest software releases

Latest Firmware releases

Manuals

Linn Kazoo User Manual

Konfig manual

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright

Network Setup

DS Budget System Setup

DS Entry Level System Setup

DS High End System Setup

Front Panel

1. PIN BUTTONS - Personalised media selection Pins 1-6
2. CONTROL DIAL - Main control dial and switch interace

Back Panel Connections

Selekt DSM

1. MAINS INPUT - To connect to the mains electricity supply.
2. FALLBACK - To put the device into Fallback mode (used when reprogramming).
3. ETHERNET - To connect to a network.
4. HDMI ARC - To connect to a TV Audio Return Channel (ARC) connection
5. USB - To connect to a PC/MAC for USB Audio playback
6. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
7. ANALOGUE INPUTS (RCAline level) - To connect sources with RCA analogue outputs.
8. DIGITAL INPUTS/OUPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
9. ANALOGUE INPUTS (RCA, MM/MC) - To connect a turntable with unbalanced (RCA) outputs.
10. EXAKT LINK- To connect to Exakt compatible devices
11. PHONO GROUND - To connect to a turntable grounding terminal.
12. ANALOGUE OUTPUTS (XLR & RCA,variable level) - To connect to a power amplifier.
13. POWER SWITCH - Mains power switch

Selekt DSM with integrated amplifier

1. MAINS INPUT - To connect to the mains electricity supply.
2. FALLBACK - To put the device into Fallback mode (used when reprogramming).
3. ETHERNET - To connect to a network.
4. HDMI ARC - To connect to a TV Audio Return Channel (ARC) connection
5. USB - To connect to a PC/MAC for USB Audio playback
6. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
7. ANALOGUE INPUTS (RCAline level) - To connect sources with RCA analogue outputs.
8. DIGITAL INPUTS/OUPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
9. ANALOGUE INPUTS (RCA, MM/MC) - To connect a turntable with unbalanced (RCA) outputs.
10. EXAKT LINK- To connect to Exakt compatible devices
11. PHONO GROUND - To connect to a turntable grounding terminal.
12. POWER AMPLIFIER OUTPUTS¹ - To connect directly to a pair of loudspeakers.
13. POWER SWITCH - Mains power switch

Notes:

¹: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking Information

• Positioning Information

For further assistance, try our customer support pages .

Stable mains supply

100-120V rms 50~60Hz,

220-240V rms 50~60Hz

Exakt options

Exakt usage with the Selekt DSM can be found in Akurate_Exakt_System