Akurate ExaktBox

From LinnDocs
Revision as of 12:25, 23 October 2014 by Yoda (talk | contribs) (Supported speakers)
Jump to: navigation, search
AkurateExaktBoxFront.jpg

Getting Started

www.linn.co.uk/go/akurate

Product info

  • Product Name: Akurate ExaktBox
  • Date of Introduction: September 2014
  • Type: Digital Crossover with Exakt Technology
Supports Stereo speakers from 2way to 5-way
Software upgradable to support more and more loudspeakers
Connects to power amplifiers and externally Aktiv speakers
  • Can only be used wit Exakt-Link output products

Support

Linn Support Site

Latest software

Latest software releases

Open source software

Manuals

Konfig manual

Safety Information

Warranty Terms and Conditions

Back Panel Connections

Ak ExaktBox BP-Nums.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. EXAKT LINK- To connect to Exakt compatible devices (CAT-5 cables)
  3. ANALOGUE OUTPUTS (XLR,variable level) - To connect to power amplifiers with balanced (XLR) analogue inputs. (300ohm Output impedance)
  4. ANALOGUE OUTPUTS (RCA, variable level) - To connect to power amplifier with unbalanced (RCA) analogue inputs. (300ohm Output impedance)
  5. FALLBACK - To put the device into Fallback mode (used when reprogramming the unit).

Note: Both XLR and RCA outputs are active simulatneously.



EXAKT LED Status

Image:Akurate ExaktBox


LED

OFF

ON

Flash / Blink

0 Master Port No Link Link Discovered Link Activity
1 Audio Clock No Clock Clock locked Clock not locked
2 Slave Port No Link Link Enabled Link Activity
3 Software Status Not Configured Running Hardware Fault













Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • The ExaktBox is shipped from Linn with no speaker setup and must be configured with Konfig software.

Exakt options

Exakt usage can be found in Klimax_Exakt_System

One of the beneifts of the Exakt system is that you can easily setup and optimise your listening environment. Simply download the latest version of Konfig (version 4.11.7 or higher) and follow the Exakt Optimsation



Supported speakers

Currently available using one Akurate Exaktbox

  • 2 x Klimax / Artikulat 350
  • 2 x Akubarik passive
  • 2 x Akudorik passive
  • 2 x Akurate 242 mk2
  • 2 x Akurate 212 mk2
  • 2 x Komri
  • 2 x Keltik
  • 2 x Espek



Coming Soon

  • Akurate 242 mk1
  • Akurate 212 mk1
  • Majik Isobarik
  • Majik 140 - Pending
  • Majik 109
  • Ninka
  • Katan
  • Kaber
  • Keilidh



non-Linn speakers

Currently available

  1. B&W Nautilus




For further assistance, try our customer support pages or the Linn Forum.