Konfig Manual

Introduction

Konfig provides advanced configuration of a Linn DS, notification and updating of a Linn DS to the latest firmware, restoring Linn DS settings back to factory defaults and manual updating of a Linn DS firmware.

Konfig can also be run from a web-browser with all functions except the software update. Get the IP address of the Linn DS/DSM from the front panel using either the:

REM 020 Remote control by pressing and holding the # button
or with the

REM 019 Remote control by pressing DVD then the INFO buttons.

When you are in DS web page select Control, this will give you the same options (except Software update) as below

Installation

System Requirements

Windows

• Windows Vista or later version of Windows
• IE9 or later
• 32 or 64-bit hardware
• Internet connection when using Exakt Systems

Mac

• Mac OS X Snow Leopard 10.6.8 or later
• 32 or 64-bit hardware
• Internet connection when using Exakt Systems

Installing

Windows

• Download the installer from the download page
• Double click the downloaded .exe file
• Follow the on screen instructions in the installer program

Mac

• Download the .pkg file from the download page
• Double click the downloaded .pkg file
• Follow the on screen instructions in the installer program

Uninstalling

Windows

• Open the Windows Control Panel and double click "Programs and Features"
• Select "Konfig" in the list of programs and click the "Uninstall" button
• Follow the on screen instructions in the uninstall window

Mac

• Using Finder drag the Konfig icon from Applications/Konfig to the waste bin

Updating

Konfig for Mac and Windows will automatically check for new software updates. Checking for available updates can also be performed manually as described below. Alternatively, Konfig can be updated by manually downloading the installation packages from the download page and installing them using the method described in the Installing section above.

Operation

Konfig has four main views, Configuration, Updates, Diagnostics, and Advanced

Configuration

Click the Show Devices button to slide a list of available devices in from the left. Selecting a device from the list will show it's configuration page in the right hand pane.

A Linn device's configuration page will only show in the right hand pane if the device is running firmware version Davaar 9 (4.9.4) or later. If your Linn device is running firmware version less that Davaar 9 (4.9.4), Konfig will provide a link to allow you to open the configuration page in your default browser.

Linn Preamplifier, Volume, Delay modes, Songcast, Net-Aux and HDMI settings

DS Volume control & Proxy RS232 control

There are two way to control the Volume on a Linn DS system:

• Internal Volume control that will directly control the analogue audio level coming out of the Linn DS. This is good for directly connecting to a Power amplifier on your speakers.

Proxy RS232 control

• Or use an external preamplifier, this means that the Linn DS will always output Line-level audio.

If you have a Linn Pre-amplifier this can be set to be controlled by the Kinsky control software.

1. Wire up the Linn DS and Linn preamplifiers/CD players RS232 and audio connections as shown Here (Ignore this if you are using an Akurate Kontrol/1)

2. Select the Linn DS and go into the Linn DS 'Device screen

3. Take note of the text in Name field

4. Go into the Linn DS 'RS232 connections screen

5. Under Linn Preamplifier/CD player select the Linn product and Linn DS com port it is wired to.

6. Press the Circle arrow to Reboot the Linn DS

DS Name in Kontrol - click to enlarge

7. Click on "Show Devices" and

8. Select the Linn Kontrol (preamplifier) and go into the Linn Kontrol Sources screen

9. Select the Input that the Linn DS is connected to and enter the Name of the Linn DS that was take from the Linn DS - Devices screen Name field (taken in point 3)

10. If a Linn CD player was also enabled enter the Name of the Linn CD device that was take from the Linn CD player - Devices screen

Ethernet controlled Linn Pre-Amplifier (Akurate Kontrol/1)

1. Select the Linn DS and go into the Linn DS 'Device screen

2. Take note of the text in Name and the Room fields

3. Click on "Show Devices" and

4. Select the Linn Kontrol (preamplifier) and go into the Linn Kontrol Sources screen

5. Change the Akurate Kontrol Device - Room name matches the Linn DS Room field taken in point 2.

6. Select the Input that the Linn DS is connected to and enter the Name of the Linn DS that was take from the Linn DS Name field taken in point 2.

I would suggest a "cut and paste" of the Room field and DS name field as this is case-senative ("lounge" is not the same as "Lounge")

Sources

Name

This is the source name that will appear in the DS user control software (Kinksy, Kazoo etc)

Visible

This allows you to hide sources. If you set Visible-NO, then this input is hidden from selection in the Front panel and the user control software selection list.
This does not mean that you have disabled the input, it only means that you cannot see it.

Delay Mode

Source delays - click to enlarge

There are 3 different delays modes with the Linn DSI/DSM/Exakt for external sources (Analogue, Toslink, SPDIF & HDMI)

Direct - This will feed the audio in real-time to the local Linn DSI/DSM, but the audio fed to the other Linn DS products will be delayed by 150mS. If this is setup and the other Linn DS products are fairly close, the music will sound like an echo

Fixed - This will delay the audio to ALL Linn DS/DSI/DSM products to keep the audio in perfect sync. This common delay is 150mS

Variable - This is a lipsync delay from 20ms-1999ms on this local DS. However the Songcast listening rooms will ONLY be in perfect sync for Lip-sync delays of =>150mS.

If the lip-sync is less than 150ms, the listening rooms will always have a 150mS from original source, this means that the audio will be out of sync by 150ms minus the lip sync value. (eg Lipsync delay 90mS, then the delay from the sender DS audio to the listening room DS is 60mS)

Lipsync delay time is variable from from 20mS-2S either from the Konfig app or the IR handset.

Input level, Unity Gain, Volume offset

Source settings - click to enlarge

Input level (Vrms) - This is to allow you to change that input profile for the specific sources. This may be due to input adapters, such as RCA-XLR, XLR-RCA etc, being used giving different output levels.

Unity Gain -This will turn off the DSM volume control whenever that input/source is selected. This is a pass-through state

Volume Offset - this is an trim adjustment. Some audio sources have a higher or lower output than normal. This trim/offset will allow you to you to switch between source and keep the same DSM volume.

Songcast / Net Aux inputs

Sources - click to enlarge

• To show the Linn DS sources you need to make these visible. This allows you to hide source that you are not going to use, such as UpnpAV that is only used with some media controllers.
• Songcast listen to Music playing on your PC SONGCAST software or listen to another DS,
  • Visible
    • Set Visible to NO will hide this on the inputs listing within the control software Kinsky.
    • Set Visible to YES will make this a visible source in Kinsky

• Net-Aux To have 3rd party Media streamers to play on your Linn DS
  • Visible
    • Set Visible to NO will hide this on the inputs listing within the control software Kinsky.
    • Set Visible to YES will make this a visible source in Kinsky
  • Auto Select
    • Set Auto Select to ON will get have the Linn DS to automatically switch to the Net-Aux input on receipt of a third party media stream.
    • Set Auto Select to OFF if you do NOT want the Linn DS to automatically switch to the Net-Aux input on receipt of a third party media stream

HDMI

HDMI - click to enlarge

• The HDMI connection can be shutdown whilst the product is in Sleep mode
• Usage of the Audio mode etc are explained here

Songcast Sender

Click here for Songcast Sender page

Exakt Optimisation

An Internet connection is required when using Exakt Systems

If you have selected an Exakt compatible device, you will see two new configuration tabs.

Exakt Setup allows you to assign an audio channel (i.e. Left or Right) to an Exakt speaker.

Exakt Optimisation provides a listner focused way of applying room optimisation.

For help with this, please see the Exakt Optimsation article.

Updates

The Updates tab indicates the number of Linn devices that currently have a newer software version available, as shown in the screenshot above.

Each device that has an update available will be in the list of updatable devices. Each device has information about the update version available as well as a link to the release notes.

To update a device click the 'Update' button. If you have more than one devices to update you can click the 'Update All' button to update all the devices at the same time.

If you updated a device to beta software and then decide you want to go back to the latest stable release you just need to un-click the Participate in beta program option, return to the Updates page and update the desired device.

Diagnostics

The Diagnostics tab indicates the number of Linn devices that currently have crash data available to send to Linn, as shown in the screenshot above.

To send the crash data from a device to Linn click the 'Send' button. If you have more than one device with crash data you can click the 'Send All' button.

If you do not wish to send the crash data for a device you can click the 'Ignore' button and you will not be notified about crash data until the device crashes again. If you want to ignore crash data from all the listed devices you can click the 'Ignore All' button.

NOTE: No personal information is sent to Linn as a result of sending crash data to Linn.

Advanced

The Advanced page allows a user to restore a Linn device back to the original factory settings. It also allows a user to manually updating a Linn device's firmware to a locally stored firmware bundle.

Restore Factory Settings

Click the 'Restore' button associated with the desired Linn device to start the process of restoring the Linn device to its factory default settings.

Updating Linn Device Firmware

First download the desired firmware from here.

Next enter the firmware's downloaded location into the text field associated with the desired Linn device, e.g. On Windows, C:\Users\<username>\Desktop\KlimaxDsm_4.7.5.zip and on Mac, /Users/<username>/Desktop/S08500116.

NOTE: On Mac the downloaded firmware is automatically unzipped by the OS and so the location is a directory unlike on Windows where the location is the downloaded zip file.

After entering the firmware's location click the 'Update' button to start the process of updating the Linn device's firmware.

Device Recovery

This option should only be used if your are having problems updating your Linn DS through the standard methods, i.e. automatically through the Update page or manually as described in the previous section.

After a 'Device Recovery' update has been performed any Linn device settings changed by the user will be set back to factory defaults.

Settings

Application Updates

Automatic update checks

Whether Konfig automatically checks for newer versions of Konfig.

Participate in beta program

Whether Konfig automatically checks for beta releases of Konfig.

Check For Updates

Force Konfig to check for newer versions of Konfig, taking into account whether 'Participate in beta program' is checked.

Device Updates

Participate in beta program

Whether Konfig automatically checks for beta releases of firmware for available Linn devices.

Diagnostics

Automatically send DS crash information to Linn

Whether to automatically send Linn device crash information to Linn for analysis (recommended to be checked).

NOTE: No personal information is sent to Linn as a result of this option being checked.

Privacy

Send anonymous usage data to Linn

Whether to allow Konfig to send anonymous usage data to Linn for analysis (recommended to be checked).

NOTE: No personal information is sent to Linn as a result of this option being checked.

Network

Which network to use to locate Linn DSs.

Troubleshooting

Konfig cannot see any of my DS

Check within Settings that the Network connection is correct.
In older versions of Konfig you only had to select the network card, (wired, wireless etc). Now Konfig asks you for the Network IP range, this is to simplify the connection as this can use BOTH the wired and wireless connections if they are connected to the same Network.
If your PC/MAC has changed Ethernet networks (for installation, Home-Work etc), the Konfig may be setup for a different address range and not see any DS products. So if your Konfig cannot see your Linn DS products, go into Settings and check that the correct Network address has been selected (click on the drop down box to see what is available)

After the software update the Linn DS is not working correctly or losing settings

This can be due to a configuration conflict with the last software version:

• From Konfig, under the Advanced page, select your DS
• Select the RESTORE button, this will reset the Linn DS back its factory defaults
• Reconfigure your DS to your preferred setting. (As this is configuration is performed in the same software version this should remove any previous conflicts).

Where is the manual for the previous releases of Konfig?

The old Konfig manual has moved to here

Konfig just doesn't run on my Mac. The icon bounces in the dock and then goes away.

• Open Finder
• From the Menu bar at the top select 'Go' the 'Go to Folder'
• Type in ~/Library/Konfig and click Go
• Select 'Options.xml' file and delete

What if I have problems updating?

Don't panic, the update process is safe, so you should always be able to recover your device

• Restart Konfig. If your device reports the expected version, the update was successful and you are done
• If your device does not report the expected version, retry the update process (if you were updating over wireless, try updating over a wired connection)
• If this fails, power cycle your device and try again
• If this fails, download the latest version of software from here
• Save this zip file to a known location on your hard drive, preferably in C:\
• Open Linn Konfig
• Go to the ‘Advanced’ tab
• Press the fallback button on the DS
• The DS should appear in Konfig with a lightning symbol beside it
• Enter the full location of the .zip file that you saved in the text box for the DS (e.g. “C:\MajikDs_4.12.357.zip”)
• Select the ‘Device Recovery’ option below the text box
• Click on ‘Update’
• The unit should update successfully
• If the update fails then contact your retailer for further support

NOTE: If there is no text box to enter the file location, ensure that you have the latest version of Internet Explorer installed. If there is still no text box, ensure that the security settings for Local Intranet are set to medium-low.

What if I want to revert to older versions of firmware?

We only support the latest firmware release and do not recommend running old firmware on any Linn DS.

We only archive released versions of firmware.

• Put your device into fallback mode from the button on the back of the device
• Download and install the compatible version of Konfig from the release download site (i.e. Cara Konfig if you are reverting to Cara firmware, Davaar for Davaar, etc)
• Download the version of firmware (zip file) you wish to use from the release download site (only firmware for your device model will work)
• From Konfig, under the Advanced page, enter the downloaded firmware location for your Linn device

Keep in mind, only compatible control points will work with your device (i.e. Cara with Cara, Davaar with Davaar, etc)

What if I have problems updating my Exakt devices?

Don't panic, the update process is safe, so you will always be able to recover your device

• Normally your Exakt devices will update seemlessly as part of the standard DS/DSM update process.
• Restart Konfig. If your Exakt device appears under Exakt Setup and there is no Update button, the update was successful and you are done.
• Restart Konfig. If your Exakt device appears under Exakt Setup and there IS an Update button, the update was unsuccessful, click Update to try again.
• If this fails, power cycle your Exakt device and the connected DS/DSM device and try again.
• If this fails, follow the device recovery process below:
• Put both your Exakt device and connected DS/DSM into fallback (from the buttons on the back of the devices).
• Find the connected DS/DSM in the Update tab and click Update.
• If you have an integrated Exakt speaker, this will fully update your Exakt device as well.
• If you have an Exakt tunebox, you will be prompted at the end of the update to enter your speaker serial number from the Exakt Setup tab to complete the update.

If you have difficulty programming an Exakt speaker or Tunebox, but the Exakt DSM is OK (require Konfig 4.12.2 onwards)

• Put the speaker or Tunebox into FALLBACK

• Make sure the Exakt DSM is in Standby
• Remove the EXAKT-LINK CAT-5 cable from the Exakt speaker/Tunebox to make sure it is powered down.
• Press and HOLD the FALLBACK button on the Exakt speaker/Tunebox
• Whilst holding the FALLBACK button, insert EXAKT-LINK connection into the Exakt Speaker/Tunebox
• Wait approx 5 seconds and release the FALLBACK button

• In Konfig in the Exakt configuration, this speaker should now show up with the FLASH symbol and an UPDATE button, press the UPDATE button and wait for this to complete. If this is a Exakt Tunebox then enter the serial number of the speaker then do the UPDATE button
• Complete

Known Issues

If you start Konfig and only get a white screen or only shows toolbar with no "Show devices" button:

1. Go into Internet Explorer - Tools - Internet options

2. Select Security

a) If "Internet" Security is High, reduce this to Medium High

b) now select "Local Internet" icon

c) If "Local Internet" Security is High, reduce this to Medium High

3. OK out of this & restart Konfig

If this does not cure the issue then

1. Run Konfig

2. Open Internet Explorer

3. Type in http://localhost:5000 into the IE address bar

(If Songbox is running then type http://localhost:5001

4. What appears in the window?

5. If Internet Explorer shown the Konfig windows OK then retry steps 3/4/5 using Chrome or another web browser.

After the update some PC/MAC cannot find any Linn DS/DSM products

Do the following procedure:

1. If you are using Norton Anti-virus, make sure that the new Konfig is added an exception

2. Restart your PC/MAC and retry Konfig 10

a) Press the SHOW DEVICES button

b) If a number appears beside the Updates tab (top of Konfig screen,

i) Press the Updates tab and press UPDATE beside your Linn DS/DSM name

ii) Wait until he update is finished and Press the SHOW DEVICES button. Your DS should now appear.

If your Linn DS/DSM is not listed

3. Press the ADVANCED tab and see if your Linn DS/DSM is listed here

If neither of these two options work

Follow the Konfig 10 diagnostics

If doing a Advanced download Konfig reports "cannot find directory..";

Check that

1. You can typed the correct file location and file name in to the download field

2. Konfig 4.10.5-4.11.2 needs internet access before doing the file update. Make sure that you have an Internet link BEFORE opening Konfig