Majik DS
Contents
Product info
- Product Name: Majik DS
- Date of Introduction: June 2008
- Type: Digital Stream Player.
- Features
Latest software
Manuals
Production Information Sheet, including Product Specifications
System Setup
Recommended DS Network setup guide
Back Panel Connections
- POWER SWITCH- For switching the power to the unit on and off.
- MAINS INPUT - For connection to the mains supply.
- EARTH GROUND - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
- ETHERNET - For connecting the unit to the network.
- FALLBACK - Used when reprogramming the unit.
- RS232 PORTS - For connection to Linn source products without ethernet ports.
- SPDIF OUT - For connecting to an external device with a digital electrical (coaxial) input.
- TOSLINK OUT - For connecting to an external device with a digital optical input.
- ANALOGUE AUDIO OUTPUTS - Analogue audio outputs for connecting to a pre-amplifier or directly to a power amplifier if the Internal Volume Control is enabled.
Front Panel Connections
- DISP BUTTON - Changes the front panel display mode.
- SKIP TRACK BUTTONS - Skips to the previous/next track
- STOP BUTTONS - Stops playing the current track
- PLAY BUTTONS - Starts playing the current track
- STANDBY BUTTON - Brings the product in/out of standby.
- FRONT PANEL DISPLAY
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- Unpacking - Please read the information on unpacking your Majik DS.
- Positioning - Please read the information on positioning your Majik DS.
For further assistance, try our customer support pages or the Linn Forum.
