DS High End System

Introduction

This is a recommended guide to setting up a high end Linn DS system, requiring all of the specified network components to be purchased, ensuring that they meet the stated specifications.

DIAGRAM (FULL SYSTEM)

It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.

Required Components

The following components are required for the system detailed in this page:

• Router
• Computer
• Linn DS
• NAS
• Network switch
• Wireless access point (WAP)
• Wireless control device

Notes:

1. Ethernet cables are required to connect devices
2. Router is required to feature address reservation
3. NAS is required to have media server software
4. WAP should have 'N' band support

Step 1: Connect Router To Network switch

1. Connect the router to the network switch.

Step 2: Connect Home Computer To Network Switch

1. Connect the home computer to the network switch.
2. Configure the router to the recommended settings.

The home computer’s network adapter should already be configured to ‘obtain an IP address automatically’.

Step 3: Connect NAS to Network Switch

1. Connect the NAS to the network switch
2. Ensure the DHCP server is disabled on the NAS
3. Configure the NAS to 'obtain an IP address automatically'

Step 4: Connect Linn DS To Network Switch

1. Connect the Linn DS to the network switch
2. Power on the Linn DS

Step 5: Install Linn DS Control Software On Home Computer

1. Download Kinsky Desktop from here
2. Install Kinsky Desktop onto the home computer
3. View the Kinsky Desktop manual here

Step 6: Connect Wireless Access Point

1. Connect WAP to the router