DS Budget System

Introduction

This is a recommended guide to setting up the most basic Linn DS system, using any networking components that are already available. It requires the minimum expenditure in order to get a Linn DS product up and running in an existing network environment.

DIAGRAM (FULL SYSTEM)

It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.

Required Components

• Router
• Home computer
• Linn DS

Notes:

1. Ethernet cables are required to connect devices
2. Router may have been provided by your internet service provider
3. An additional network switch may be required (see Step 2)

Step 1: Connect Home Computer To Router

If the home computer already has a working internet connection then continue to step 2.

1. Connect the home computer to the router
2. Power on the router
3. Power on the home computer

The home computer’s network adapter should already be configured to ‘obtain an IP address automatically’.

Step 2: Connect Linn DS To Router

1. Connect the Linn DS to the router
2. Power on the Linn DS

If the router does not have enough ethernet ports to connect the Linn DS then a network switch will be required and the devices should be connected as follows.

1. Connect the router to the network switch
2. Connect the computer to the network switch
3. Connect the Linn DS to the network switch
4. Power on the network switch
5. Power on the Linn DS

Step 3: Install Linn DS Control Software On Home Computer

1. Download Kinsky Desktop from here
2. Install Kinsky Desktop onto the home computer
3. View the Kinsky Desktop manual here