Template:ModuleInfo:SELEKT DSM CARTRIDGE - 1.1

SELEKT DSM CARTRIDGE - 1.1

Linn part#       SK CHH1

This is a module with 1off RCA line-level audio channel and 1off Power Amplifier outputs.
This is designed for a Centre channel (Power Amplifier) and Sub-woofer (RCA-Line Level) connection in a Surround system

This module has a standard-level 1 Digital to Analogue Convertor on both Power Amplifier and RCA outputs .

Line Output:
	Output Level:	2V rms @volume 80
	Output Impedance:	300Ω

Power Amplifier Output:

Bridged Class-D amplifier with post-filter feedback using 4mm/Banana plug terminals.

Max output power:

100W/channel into 4Ω load,

50W / channel into 8Ω load

Note:

• An upgrade to the Selekt Power supply may be requried to use any new modules.
• Power Amplifier outputs: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.
  
• Some Electrostatic speakers may require a modification to work with Linn Class-D amplifier. Please refer to the speaker manufacturers website for information.
• The Selekt power amplfiers have a slightly lower gain than other Linn power amplifiers, (original Majik/Akurate..). If you are going to Bi-Amp a pair of speakers then we would recommend either ALL Selekt Power amplifier cartridges or ALL Selekt Line level cartridges with external amplifiers.