Sneaky DSM
Contents
Product info
- Product Name: Sneaky DSM
- Date of Introduction: February 2012
- Type: Integrated digital music player, pre-amplifier, and power amplifier
- Dimensions: 350 mm (width) x 54.5 mm (height) x 215 mm (depth)
- Features
Support
Latest software
Manuals
HDMI Setup
Network Setup
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- FALLBACK- To put the device into Fallback mode (used when reprogramming).
- ETHERNET - To connect to a network.
- HDMI OUTPUT - To connect to a display device with HDMI inputs.
- HDMI INPUTS (3) - To connect sources with HDMI outputs.
- ANALOGUE OUTPUT (RCA, variable/fixed level) - To connect to subwoofer or external power amplifier (or pre amplifier when internal volume control is disabled, this will also disable the internal Power amplifier/speaker outputs) with unbalanced (RCA) analogue inputs.
- DIGITAL INPUT (Toslink) - To connect sources with Toslink (optical) digital outputs.
- DIGITAL INPUT (Spdif) - To connect sources with Spdif (RCA) digital outputs.
- ANALOGUE INPUT (line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
- SPEAKER OUTPUTS - To connect to loudspeakers, Neutrik 4 pole connector
Front Panel Connections
The front slot contains the IR sensor and the Standby LED
STANDBY LED FUNCTIONS
|
DIM/OFF indicates |
BRIGHT/ON indicates |
Slow Flash |
Fast Flash |
| Device in standby | Device active (will also pulse on IR command received) | Searching for IP address (boot) | Fallback (reprogramme) |
Speaker Wiring
The Sneaky DSM has 4 DAC channels and 4 Power Amplifiers. These amplifiers can be configured in stereo mode or bi-amped mode (via Konfig). All speaker outputs (and Analogue Output) share the same common Volume control.
Connections to the speakers are made via Neutrik Speakon connectors, NL4FX. Neutrik Speakon Assembly Instructions
The stereo mode is best suited to connecting to passive one-way speakers.
1+ -> Speaker + 1- -> Speaker - 2+ and 2- not connected
The bi-amped mode is best suited to connecting to passive two-way speakers.
1+ -> Speaker 1+ 1- -> Speaker 1- 2+ -> Speaker 2+ 2- -> Speaker 2-
The wiring details are shown below:
- Power output: 50W/channel
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
For further assistance, try our customer support pages or the Linn Forum.
