SO2:Ceiling Heights

You get some ceilings that are not flat, you may have slopes, how do you deal with this?

This is by defining the Ceiling Type as Variable Height Ceiling

Ceiling heights points

This will allow you to define points of different heights of the ceiling. This allows you to define, and add additional points to create a fresh ceiling state.

In the above example, each corner has a height of 2.4M. The additional height points in the middle of the side walls with a height of 2.8M. This would create a peaked roof, as can be seen in the wall preview picture - bottom left of above image.)

With a room with a more complex shape, you will have to get the correct heights for each corner within the room. But when you look at the ceiling shape, it is nothing like the actual ceiling. This can be fixed by either

Fix button, on the Ceiling shape page. The issue with multiple ceiling heights is that it can link to other height points. The FIX<.b>button will allow you to join the