Exakt Release Notes
Public Release: 26 Mar 2018 (4.54.257)
- Initial release for Akurate Exaktbox 6 Katalyst
- Initial release for Akurate Exaktbox 10 Katalyst
- Updated metrics for Custom2K and Komponent to fix Konfig crash when applying space optimisation * Reduced default gain of all Linn & 3rd party cartridges by 6dB (EMT by 12dB as these are very high output)
- Updated all cartridge designs to include new gain elements
- Updated firmware for compatibility with new Urika II gain settings
- Fixed rare failure where fallback is programmed with the wrong data
Public Release: 29 Jan 2018 (4.53.241)
- Initial release for Urika II
- Initial release of Linn and 3rd party cartridge designs for use with Urika II
- Added Space+ support for Komponent speakers (104, 106, 110)
- Added Space+ support for Custom2K speakers (104, 106)
- Added Space+ support for Kudos Titan 707
- Added extended drive unit modelling filter designs for Akubarik
- Fixed no audio problem for certain Exakt Katalyst setups
Fallback
- Now reference fallback version 4.382.36224
- Fixed occasional failures when restoring using fallback button press
- Katalyst Exakt Engine fallback button is now only checked on a cold boot. This was stopping the Konfig program sequence from completing.
- Removed legacy boot code that is no longer needed
Public Release: 15 Aug 2017 (4.52.161)
02 Aug 2017
- Fix to allow single channel filters (specifically center channels) to work with two channel firmware.
17 Jul 2017
- Initial release for Akubarik and Akudorik
29 Jun 2017
- Added mono support for stereo Exaktboxes (Akurate Exaktbox 10 and Majik Exaktbox-I) for use with center channel filter designs
28 Jun 2017
- Added center channel support for AV5120, Akurate 225, Ekwal, IW10, Majik 112 and Trikan
- Re-release of Independent drive unit modelling designs for Akubarik, Akudorik and Klimax 350 (for new filter selection option in Konfig)
27 Jun 2017
- 2017 Klimax 350 redesign including full servo model
20 Jun 2017
- Further fix for potential unrecoverable error if power was removed during fallback reprogramming
- Now reference fallback version 4.217.35716
19 Jun 2017
- Fix for potential unrecoverable error if power was removed during fallback reprogramming
- Now reference fallback version 4.215.35704
- Updated to version 4.215.35704
18 May 2017
- Fix for occasional pops/clicks on Exakt Katalyst devices when clock pulling is active (digital inputs, airplay, etc)
08 May 2017
- Fixed intermittent startup problem found in some Katalyst ExaktEngines
04 May 2017
- Now reference fallback version 4.115.35507
Public Release: 20 Mar 2017 (4.51.110)
16 Mar 2017
- Fixed balance issue on stereo Katalyst ExaktBoxes
- Fixed occasional left/right channel reversal on stereo Katalyst ExaktBoxes
14 Mar 2017
- Fixes potential issue with Klimax Katalyst ExaktBoxes in stereo configuration playing 192k sources
08 Mar 2017
- Fixed #5207: Surround - Analog outs ~3ms ahead of exakt outs
- Fixed clicks and pops on multi-channel Exakt setups, particularly for daisy-chained scenarios
Public Release: 07 Mar 2017 (4.50.100)
27 Feb 2017
- Updated Klimax Exaktbox (Katalyst) to use dual-mono designs where available
23 Feb 2017
- Added LFE designs for all currently supported subwoofers (for movies in surround mode)
- Fixed EQ delay reporting
01 Feb 2017
- Split single Akurate 225 design into quad-amped and pent-amped
30 Jan 2017
- Improved discovery and reprogramming time
- Initial release for catalyst development
- Now reference fallback version 4.59.35291
- Now reference fallback version 4.99.35224
- Updated all generic model parameters
20 Dec 2016
- Added Linn center channel support: Akurate 225, AV 5120, Ekwal, Majik 112, Trikan
- Added new KEF designs authored by KEF (Blade, Reference 3 and Reference 5)
- Added new KEF metrics authored by KEF (Blade, Reference 3 and Reference 5)
- Now include a phase only model for the roll-off of the highest frequency unit in most speakers
- Now reference fallback version 4.47.35039
- Updated to latest Exakt link compatability
- Updated to version 4.47.35039
Public Release: 16 Dec 2016 (4.27.1747)
15 Dec 2016
- Blade Filter (mono): Removed extra xml tag in design which causes compiler to fail
- Blade Filter (stereo): Removed extra xml tag in design which causes compiler to fail
- Reference 3 Long-port Filter (mono): Removed extra xml tag in design which causes compiler to fail
- Reference 3 Long-port Filter (stereo): Removed extra xml tag in design which causes compiler to fail
- Reference 3 Mixed-port Filter (mono): Removed extra xml tag in design which causes compiler to fail
- Reference 3 Mixed-port Filter (stereo): Removed extra xml tag in design which causes compiler to fail
- Reference 3 Short-port Filter (mono): Removed extra xml tag in design which causes compiler to fail
- Reference 3 Short-port Filter (stereo): Removed extra xml tag in design which causes compiler to fail
- Reference 5 Long-port Filter (mono): Removed extra xml tag in design which causes compiler to fail
- Reference 5 Long-port Filter (stereo): Removed extra xml tag in design which causes compiler to fail
- Reference 5 Mixed-port Filter (mono): Removed extra xml tag in design which causes compiler to fail
- Reference 5 Mixed-port Filter (stereo): Removed extra xml tag in design which causes compiler to fail
- Reference 5 Short-port Filter (mono): Removed extra xml tag in design which causes compiler to fail
- Reference 5 Short-port Filter (stereo): Removed extra xml tag in design which causes compiler to fail
13 Dec 2016
- Blade Dimensions: Initial release
- Blade Filter (mono): Initial release
- Blade Filter (stereo): Initial release
- Reference 3 Dimensions: Initial release
- Reference 3 Long-port Filter (mono): Initial release
- Reference 3 Long-port Filter (stereo): Initial release
- Reference 3 Mixed-port Filter (mono): Initial release
- Reference 3 Mixed-port Filter (stereo): Initial release
- Reference 3 Short-port Filter (mono): Initial release
- Reference 3 Short-port Filter (stereo): Initial release
- Reference 5 Dimensions: Updated by KEF
- Reference 5 Long-port Filter (mono): Initial release
- Reference 5 Long-port Filter (stereo): Initial release
- Reference 5 Mixed-port Filter (mono): Initial release
- Reference 5 Mixed-port Filter (stereo): Initial release
- Reference 5 Short-port Filter (mono): Initial release
- Reference 5 Short-port Filter (stereo): Initial release
Public Release: 12 Dec 2016 (4.26.1745)
05 Dec 2016
- Exakt Compiler: Fixed bug in the binary format of the the speaker delay coefficients
- Exakt Compiler: Fixed potential for numerical errors when many filters are used in Space Optimisation
Public Release: 25 Oct 2016 (4.25.1471)
24 Oct 2016
- 520 Firmware: Fix thump on standby exit whilst external source selected
- 530 Firmware: Fix thump on standby exit whilst external source selected
- Akubarik Exakt Firmware: Fix thump on standby exit whilst external source selected
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Fix thump on standby exit whilst external source selected
- Akurate Exaktbox 6 Firmware (Mono): Fix thump on standby exit whilst external source selected
- Akurate Exaktbox 6 Firmware (Stereo): Fix thump on standby exit whilst external source selected
- Akurate Exaktbox Firmware (Stereo): Fix thump on standby exit whilst external source selected
- Exaktbox Sub Firmware (Stereo): Fix thump on standby exit whilst external source selected
- Klimax Exakt 350 Firmware (Mono): Fix thump on standby exit whilst external source selected
- Klimax Exaktbox Firmware (Mono): Fix thump on standby exit whilst external source selected
- Klimax Exaktbox Firmware (Stereo): Fix thump on standby exit whilst external source selected
- Majik Exaktbox-I Firmware (Stereo): Fix thump on standby exit whilst external source selected
Public Release: 19 Sep 2016 (4.24.1727)
25 Jul 2016
- Keilidh Bi-amped Bass with Tweeter 015 Filter (stereo): Initial release
- Keilidh Tri-amped Tweeter 015 Filter (mono): Initial release
- Keilidh Tri-amped Tweeter 015 Filter (stereo): Initial release
- Keilidh Tri-amped Tweeter 038 Filter (mono): Fixed tweeter drive unit index
- Keilidh Tri-amped Tweeter 038 Filter (stereo): Fixed tweeter drive unit index
- Keilidh Tri-amped with Tweeter 015 Filter (mono): Initial release
- Keilidh Tri-amped with Tweeter 015 Filter (stereo): Initial release
- Keilidh Tri-amped with Tweeter 038 Filter (mono): Fixed tweeter drive unit index
- Keilidh Tri-amped with Tweeter 038 Filter (stereo): Fixed tweeter drive unit index
30 Jun 2016
- 520 Firmware: Updated to hardware version 0.0.207
- 530 Firmware: Updated to hardware version 0.0.207
- Akubarik Exakt Firmware: Updated to hardware version 0.0.207
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Updated to hardware version 0.0.207
- Akurate Exaktbox 6 Firmware (Mono): Updated to hardware version 0.0.207
- Akurate Exaktbox 6 Firmware (Stereo): Updated to hardware version 0.0.207
- Akurate Exaktbox Firmware (Stereo): Updated to hardware version 0.0.207
- B&W 802D Quad-amped Filter (mono): Updated to work with new modelling techniques
- B&W 802D Quad-amped Filter (stereo): Updated to work with new modelling techniques
- B&W 802D Tri-amped Filter (stereo): Updated to work with new modelling techniques
- Exakt Compiler: Handle case where Exakt hardware does not support speaker delays.
- Exaktbox Sub Firmware (Stereo): Updated to hardware version 0.0.207
- Keilidh Bi-amped Bass with Tweeter 038 Filter (stereo): Initial release
- Keilidh Tri-amped Tweeter 038 Filter (mono): Initial release
- Keilidh Tri-amped Tweeter 038 Filter (stereo): Initial release
- Keilidh Tri-amped with Tweeter 038 Filter (mono): Initial release
- Keilidh Tri-amped with Tweeter 038 Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (mono): Updated to work with new modelling techniques
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Updated to work with new modelling techniques
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (mono): Updated to work with new modelling techniques
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Updated to work with new modelling techniques
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (mono): Updated to work with new modelling techniques
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Updated to work with new modelling techniques
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (mono): Updated to work with new modelling techniques
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Updated to work with new modelling techniques
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Updated to work with new modelling techniques
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Updated to work with new modelling techniques
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Updated to work with new modelling techniques
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Updated to work with new modelling techniques
- Klimax Exakt 350 Firmware (Mono): Updated to hardware version 0.0.207
- Klimax Exaktbox Firmware (Mono): Updated to hardware version 0.0.207
- Klimax Exaktbox Firmware (Stereo): Updated to hardware version 0.0.207
- Majik Exaktbox-I Firmware (Stereo): Updated to hardware version 0.0.207
- Ninka Bi-amped Bass Filter (stereo): Updated to work with new modelling techniques
- Ninka Tri-amped Filter (mono): Initial release
- Ninka Tri-amped Filter (stereo): Initial release
- Ninka Tri-amped Filter (stereo): Updated to work with new modelling techniques
15 Jun 2016
- 520 Firmware: Updated for compatability with Davaar 50
- 530 Firmware: Updated for compatability with Davaar 50
- AV5140 with Tweeter 015 Filter (stereo): Initial release
- AV5140 with Tweeter 038 Filter (stereo): Initial release
- Akubarik Exakt Firmware: Updated for compatability with Davaar 50
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Updated for compatability with Davaar 50
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers & Subwoofer Filter (mono): Fixed to work with new modelling techniques
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers & Subwoofer Filter (stereo): Fixed to work with new modelling techniques
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers & Subwoofer Filter (mono): Fixed to work with new modelling techniques
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers & Subwoofer Filter (stereo): Fixed to work with new modelling techniques
- Akurate Exaktbox 6 Firmware (Mono): Updated for compatability with Davaar 50
- Akurate Exaktbox 6 Firmware (Stereo): Updated for compatability with Davaar 50
- Akurate Exaktbox Firmware (Stereo): Updated for compatability with Davaar 50
- B&W 802D Quad-amped Filter (mono): Fixed to work with new modelling techniques
- B&W 802D Quad-amped Filter (stereo): Fixed to work with new modelling techniques
- B&W 802D Tri-amped Filter (stereo): Fixed to work with new modelling techniques
- Espek Filter (stereo): Initial release
- Exakt Compiler: Updated for compatability with Davaar 50
- Exaktbox Sub Firmware (Stereo): Updated for compatability with Davaar 50
- Kaber with Tweeter 015 & Subwoofer Filter (mono): Fixed to work with new modelling techniques
- Kaber with Tweeter 015 & Subwoofer Filter (stereo): Fixed to work with new modelling techniques
- Kaber with Tweeter 015 Filter (stereo): Fixed to work with new modelling techniques
- Kaber with Tweeter 038 & Subwoofer Filter (mono): Fixed to work with new modelling techniques
- Kaber with Tweeter 038 & Subwoofer Filter (stereo): Fixed to work with new modelling techniques
- Kaber with Tweeter 038 Filter (stereo): Fixed to work with new modelling techniques
- Katan Filter (mono): Fixed to work with new modelling techniques
- Katan Filter (stereo): Fixed to work with new modelling techniques
- Keilidh Bi-amped Bass Filter (stereo): Updated compatability in preparation for upgrade
- Keilidh Tri-amped Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (mono): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (mono): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (mono): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (mono): Updated compatability in preparation for upgrade
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Updated compatability in preparation for upgrade
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Updated compatability in preparation for upgrade
- Klimax Exakt 350 Firmware (Mono): Updated for compatability with Davaar 50
- Klimax Exaktbox Firmware (Mono): Updated for compatability with Davaar 50
- Klimax Exaktbox Firmware (Stereo): Updated for compatability with Davaar 50
- Kudos Super 10 Filter (stereo): Fixed to work with new modelling techniques
- Kudos Super 20 Filter (stereo): Fixed to work with new modelling techniques
- Majik Exaktbox-I Firmware (Stereo): Updated for compatability with Davaar 50
- Nautilus Filter (mono): Updated compatability in preparation for upgrade
- Nautilus Filter (stereo): Updated compatability in preparation for upgrade
- Ninka Bi-amped Bass Filter (stereo): Updated compatability in preparation for upgrade
- Ninka Tri-amped Filter (stereo): Updated compatability in preparation for upgrade
- PMC Twenty.26 Filter (stereo): Initial release
Public Release: 02 May 2016 (4.23.1661)
26 Apr 2016
- AV5150 Filter (stereo): Added first order roll-off to counter magnitude and phase correction of inductive rise.
- IW10 Dimensions: Initial release
- IW10 Filter (stereo): Initial release
- Melodik Filter (stereo): Added first order roll-off to counter magnitude and phase correction of inductive rise.
30 Mar 2016
- AV5150 Filter (stereo): Initial release
- DB1 Dimensions: Initial release
- DB1 Filter (stereo): Initial release
- Exakt Compiler: Allow compensation for electronic filtering in speakers
- Exakt Compiler: Support defining eq filters that are linear or minimum phase
- Exakt Compiler: Support minimum phase speaker designs
- Exakt Compiler: Supports fallback to generic measurement parameters defined in the speaker design when no specific measurement data is available
- Gibraltar G2 Dimensions: Initial release
- Gibraltar G2 Filter (stereo): Initial release
- Melodik Filter (stereo): Initial release
- Reference 5 Dimensions: Now supports the Kef created crossover design.
- S/2 Dimensions: Initial release
- S/2 Filter (stereo): Initial release
- S/3 Dimensions: Initial release
- S/3 Filter (stereo): Initial release
- S/5 Dimensions: Initial release
- S/5 Filter (stereo): Initial release
Public Release: 15 Mar 2016 (4.22.1613)
10 Mar 2016
- Isobarik Six-amped Filter (mono): Fixed to work correctly with Konfig.
- PMC Twenty.26 Dimensions: Initial release
- PMC Twenty.26 Filter (mono): Initial release
- PMC Twenty.26 Filter (stereo): Initial release
- Sizmik 1245 Dimensions: Fixed drive unit name.
Public Release: 07 Mar 2016 (4.21.1596)
24 Feb 2016
- 520 with Fabrik 6 Filter (mono): Initial release
- 530 with Fabrik 6 Filter (mono): Initial release
- JBL K2 S9900 Dimensions: Initial release
- JBL K2 S9900 Filter (stereo): Initial release
- Kudos Titan 808 Filter (stereo): New crossover design by Kudos including new model information.
- Sizmik 1245 Dimensions: Initial release
- Sizmik 1245 Filter (stereo): Initial release
Public Release: 05 Jan 2016 (4.20.1532)
21 Dec 2015
- 520 Firmware: Fixed issue with keep awake signal not going off.
- 530 Firmware: Fixed issue with keep awake signal not going off.
- Akubarik Exakt Firmware: Fixed issue with keep awake signal not going off.
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Fixed issue with keep awake signal not going off.
- Akurate Exaktbox 6 Firmware (Mono): Fixed issue with keep awake signal not going off.
- Akurate Exaktbox 6 Firmware (Stereo): Fixed issue with keep awake signal not going off.
- Akurate Exaktbox Firmware (Stereo): Fixed issue with keep awake signal not going off.
- Exaktbox Sub Firmware (Stereo): Fixed issue with keep awake signal not going off.
- Klimax Exakt 350 Firmware (Mono): Fixed issue with keep awake signal not going off.
- Klimax Exaktbox Firmware (Mono): Fixed issue with keep awake signal not going off.
- Klimax Exaktbox Firmware (Stereo): Fixed issue with keep awake signal not going off.
- Majik Exaktbox-I Firmware (Stereo): Fixed issue with keep awake signal not going off.
Public Release: 14 Dec 2015 (4.19.1514)
03 Dec 2015
- 520 with Fabrik 5 Filter (mono): Initial release
- 530 with Fabrik 5 Filter (mono): Initial release
- Fixed problem with new Komri filters not appearing for update in Konfig.
30 Nov 2015
- Isobarik Dimensions: Initial release
- Isobarik Quad-amped Filter (mono): Initial release
- Isobarik Quad-amped Filter (stereo): Initial release
- Isobarik Tri-amped Filter (stereo): Initial release
Public Release: 01 Dec 2015 (4.18.1500)
24 Nov 2015
- Akurate 242 (Serial Number after 1144285) Filter (mono): Fixed to work with ne w modelling techniques
- Akurate 242 (Serial Number after 1144285) Filter (stereo): Fixed to work with new modelling techniques
- Majik 109 Filter (stereo): Fixed to work with new modelling techniques
23 Nov 2015
- Akurate 212 (Serial Number 1144285 or earlier) Filter (mono): Updated filter t o be compatible with new modelling techniques
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Fi lter (mono): Updated filter to be compatible with new modelling techniques
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Fi lter (stereo): Updated filter to be compatible with new modelling techniques
- Akurate 212 (Serial Number after 1144285) Filter (mono): Updated filter to be compatible with new modelling techniques
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (mono): Updated filter to be compatible with new modelling techniques
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (stereo): Updated filter to be compatible with new modelling techniques
- Akurate 242 (Serial Number 1144285 or earlier) Filter (mono): Updated filter t o be compatible with new modelling techniques
- Akurate 242 (Serial Number 1144285 or earlier) Filter (stereo): Updated filter to be compatible with new modelling techniques
- Akurate 242 (Serial Number after 1144285) Filter (mono): Updated filter to be compatible with new modelling techniques
- Akurate 242 (Serial Number after 1144285) Filter (stereo): Updated filter to b e compatible with new modelling techniques
- Majik 109 Filter (stereo): Updated filter to be compatible with new modelling techniques
- Majik Isobarik with Single-ended Amplifiers Filter (mono): Updated filter to b e compatible with new modelling techniques
- Majik Isobarik with Single-ended Amplifiers Filter (stereo): Updated filter to be compatible with new modelling techniques
18 Nov 2015
- Akurate 212 (Serial Number 1144285 or earlier) Filter (mono): Applied new mode lling techniques
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Fi lter (mono): Applied new modelling techniques
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Fi lter (stereo): Applied new modelling techniques
- Akurate 212 (Serial Number after 1144285) Filter (mono): Applied new modelling techniques
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (mono): Applied new modelling techniques
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (stereo): Applied new modelling techniques
- Akurate 242 (Serial Number 1144285 or earlier) Filter (mono): Applied new mode lling techniques
- Akurate 242 (Serial Number 1144285 or earlier) Filter (stereo): Applied new mo delling techniques
- Akurate 242 (Serial Number after 1144285) Filter (mono): Applied new modelling techniques
- Akurate 242 (Serial Number after 1144285) Filter (stereo): Applied new modelli ng techniques
- Majik 109 Filter (stereo): Applied new modelling techniques
- Majik 140 with Single-ended Amplifiers Filter (mono): Applied new modelling te chniques
- Majik 140 with Single-ended Amplifiers Filter (stereo): Applied new modelling techniques
- Majik Isobarik with Single-ended Amplifiers Filter (mono): Applied new modelli ng techniques
- Majik Isobarik with Single-ended Amplifiers Filter (stereo): Applied new model ling techniques
05 Nov 2015
- 520 Firmware: Now references fallback version 4.15.1455
- 530 Firmware: Now references fallback version 4.15.1455
- Akubarik Exakt Firmware: Now references fallback version 4.15.1455
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Now references f allback version 4.15.1455
- Akurate Exaktbox 6 Firmware (Mono): Now references fallback version 4.15.1455
- Akurate Exaktbox 6 Firmware (Stereo): Now references fallback version 4.15.145 5
- Akurate Exaktbox Firmware (Stereo): Now references fallback version 4.15.1455
- Exakt Compiler: Improved computational speed
- Exakt fallback firmware: Updated to version 4.15.1455
- Exaktbox Sub Firmware (Stereo): Now references fallback version 4.15.1455
- Klimax Exakt 350 Firmware (Mono): Now references fallback version 4.15.1455
- Klimax Exaktbox Firmware (Mono): Now references fallback version 4.15.1455
- Klimax Exaktbox Firmware (Stereo): Now references fallback version 4.15.1455
- Majik Exaktbox-I Firmware (Stereo): Now references fallback version 4.15.1455
28 Oct 2015
- Akubarik Filter (mono): File format change to accommodate updated design using new models and linear phase adjustments
- Akudorik Exakt Filter (mono): Updated design using new models and linear phase adjustments
- Akudorik Filter (mono): Added keep awake flags to tweeter and supertweeter
- Akudorik Filter (mono): Updated design using new models and linear phase adjustments
- Akudorik Filter (stereo): Added keep awake flags to tweeter and supertweeter
- Akudorik Filter (stereo): Updated design using new models and linear phase adjustments
- Akudorik Passive Filter (mono): Updated design using new models and linear phase adjustments
- Akurate 221 Dimensions: Now available for use with Exaktbox Sub
- Akurate 221 Filter (stereo): Initial release
- Espek Filter (mono): File format change (for correct drive unit name) to accommodate updated design using new models and linear phase adjustments
- Espek Filter (mono): File format change to accommodate updated design using new models and linear phase adjustments
- Espek Filter (stereo): File format change (for correct drive unit name) to accommodate updated design using new models and linear phase adjustments
- Espek Filter (stereo): File format change to accommodate updated design using new models and linear phase adjustments
- Klimax 350 Filter (stereo): File format change to accommodate updated design using new models and linear phase adjustments
- Klimax 350 with Balanced Amplifiers Filter (mono): File format change to accommodate updated design using new models and linear phase adjustments
- Klimax 350 with Single-ended Amplifiers Filter (mono): File format change to accommodate updated design using new models and linear phase adjustments
- Komri Filter (stereo): Updated design using new models and linear phase adjustments
- Komri with Balanced Amplifiers Filter (mono): Updated design using new models and linear phase adjustments
- Komri with Single-ended Amplifiers Filter (mono): Updated design using new models and linear phase adjustments
27 Oct 2015
- Akubarik Filter (mono): Updated design using new models and linear phase adjustments
- Espek Filter (mono): Initial release
- Espek Filter (stereo): Updated design using new models and linear phase adjustments
- Klimax 350 Filter (stereo): Updated design using new models and linear phase adjustments
- Klimax 350 with Balanced Amplifiers Filter (mono): Updated design using new models and linear phase adjustments
- Klimax 350 with Single-ended Amplifiers Filter (mono): Updated design using new models and linear phase adjustments
21 Oct 2015
- AV5140 with Tweeter 015 Filter (mono): Initial release
- AV5140 with Tweeter 015 Filter (stereo): Updated design using new models and linear phase adjustments
- AV5140 with Tweeter 038 Filter (mono): Initial release
- AV5140 with Tweeter 038 Filter (stereo): Updated design using new models and linear phase adjustments
19 Oct 2015
- 520 Firmware: Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- 530 Firmware: Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Akubarik Exakt Filter (mono): File format change to accommodate updated design using new model including 4th order low frequency
- Akubarik Exakt Firmware: Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Akubarik Filter (stereo): File format change to accommodate updated design using new model including 4th order low frequency
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Akurate Exaktbox 6 Firmware (Mono): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Akurate Exaktbox 6 Firmware (Stereo): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Akurate Exaktbox Firmware (Stereo): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Exaktbox Sub Firmware (Stereo): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Klimax 350 Exakt Filter (mono): File format change to accommodate updated design using new models and replacing all minimum phase filters with linear phase filters
- Klimax Exakt 350 Firmware (Mono): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Klimax Exaktbox Firmware (Mono): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Klimax Exaktbox Firmware (Stereo): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
- Majik Exaktbox-I Firmware (Stereo): Fix for pops and clicks heard while changing source or sample rate on Exaktbox devices.
08 Oct 2015
- Akubarik Exakt Filter (mono): Updated design using new model including 4th order low frequency
- Akubarik Filter (stereo): Updated design using new model including 4th order low frequency
- Klimax 350 Exakt Filter (mono): Updated design using new models and replacing all minimum phase filters with linear phase filters
06 Oct 2015
- 520 Firmware: Maintenance release
- 530 Firmware: Maintenance release
- Akubarik Exakt Firmware: Maintenance release
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Maintenance release
- Akurate Exaktbox 6 Firmware (Mono): Maintenance release
- Akurate Exaktbox 6 Firmware (Stereo): Maintenance release
- Akurate Exaktbox Firmware (Stereo): Maintenance release
- Exaktbox Sub Firmware (Stereo): Maintenance release
- Klimax Exakt 350 Firmware (Mono): Maintenance release
- Klimax Exaktbox Firmware (Mono): Maintenance release
- Klimax Exaktbox Firmware (Stereo): Maintenance release
- Majik Exaktbox-I Firmware (Stereo): Maintenance release
28 Sep 2015
- 520 with Fabrik 4 Filter (mono): Harris Tweed will be referred to as Fabrik 4
- 530 with Fabrik 4 Filter (mono): Harris Tweed will be referred to as Fabrik 4
- Exakt Compiler: Added support for speaker delays
23 Sep 2015
- AV5150 Dimensions: Updated metrics from measurements.
- AV5150 Filter (stereo): Updated Linn Subwoofer designs with new window parameter.
- Afekt Filter (stereo): Updated Linn Subwoofer designs with new window parameter.
- Majik 126 Filter (stereo): Updated Linn Subwoofer designs with new window parameter.
- Melodik Dimensions: Updated metrics from measurements.
- Melodik Filter (stereo): Updated Linn Subwoofer designs with new window parameter.
- Sizmik 10 Filter (stereo): Updated Linn Subwoofer designs with new window parameter.
16 Sep 2015
- Afekt Dimensions: Updated metrics from measurements.
- Exakt Compiler: Added support for Exaktbox Sub.
- Klimax 345 Dimensions: Initial release
- Klimax 345 Filter (stereo): Initial release
- Majik 126 Dimensions: Updated metrics from measurements.
- Sizmik 10 Dimensions: Updated metrics from measurements.
03 Sep 2015
- 520 Firmware: Fix volume ramping
- 530 Firmware: Fix volume ramping
- Akubarik Exakt Firmware: Fix volume ramping
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Fix volume ramping
- Akurate Exaktbox 6 Firmware (Mono): Fix volume ramping
- Akurate Exaktbox 6 Firmware (Stereo): Fix volume ramping
- Akurate Exaktbox Firmware (Stereo): Fix volume ramping
- Exakt Compiler: Removed empty segments for unused xover channels
- Exaktbox Sub Firmware (Stereo): Fix volume ramping
- Klimax Exakt 350 Firmware (Mono): Fix volume ramping
- Klimax Exaktbox Firmware (Mono): Fix volume ramping
- Klimax Exaktbox Firmware (Stereo): Fix volume ramping
- Majik Exaktbox-I Firmware (Stereo): Fix volume ramping
01 Sep 2015
- AV5150 Filter (stereo): Renamed drive units to match measurements.
- Afekt Filter (stereo): Renamed drive units to match measurements.
- Akurate 226 Filter (stereo): Renamed drive units to match measurements.
- Majik 126 Filter (stereo): Renamed drive units to match measurements.
- Melodik Filter (stereo): Renamed drive units to match measurements.
- Reference 5 Quad-amped, Short-port Filter (mono): Renamed drive units to match measurements.
- Reference 5 Quad-amped, Short-port Filter (stereo): Renamed drive units to match measurements.
- Reference 5 Tri-amped, Short-port Filter (mono): Removed second speaker from crossover design.
- Reference 5 Tri-amped, Short-port Filter (mono): Renamed drive units to match measurements.
- Reference 5 Tri-amped, Short-port Filter (stereo): Removed second speaker from crossover design.
- Reference 5 Tri-amped, Short-port Filter (stereo): Renamed drive units to match measurements.
- Sizmik 10 Filter (stereo): Renamed drive units to match measurements.
31 Aug 2015
- 520 with Fabrik 1 Filter (mono): Updated following cloth tuning.
- 520 with Fabrik 3 Filter (mono): Updated following cloth tuning.
- 530 with Fabrik 1 Filter (mono): Fixed midrange roll-on model type.
- 530 with Fabrik 1 Filter (mono): Updated model parameters.
- 530 with Fabrik 2 Filter (mono): Updated model parameters.
- 530 with Fabrik 3 Filter (mono): Updated model parameters.
- AV5150 Filter (stereo): Include model information.
- Afekt Filter (stereo): Include model information.
- Akurate226 Filter (stereo): Include model information.
- Exakt Compiler: Added support for down-mixing.
- Majik 126 Filter (stereo): Include model information.
- Melodik Filter (stereo): Include model information.
- Reference 5 Quad-amped, Short-port Filter (mono): Include model information.
- Reference 5 Quad-amped, Short-port Filter (stereo): Include model information.
- Reference 5 Tri-amped, Short-port Filter (mono): Include model information.
- Reference 5 Tri-amped, Short-port Filter (stereo): Include model information.
- Sizmik Filter (stereo): Include model information.
27 Aug 2015
- 520 with Fabrik 1 [Placeholder] Filter (mono): Initial release
- 520 with Fabrik 2 Filter (mono): Maintenance changes.
- 520 with Fabrik 3 [Placeholder] Filter (mono): Initial release
- 530 with Fabrik 1 Filter (mono): Added Fabrik modelling.
- 530 with Fabrik 1 [Placeholder] Filter (mono): Initial release
- 530 with Fabrik 2 Filter (mono): Added Fabrik modelling.
- 530 with Fabrik 2 Filter (mono): Combined internal and external design.
- 530 with Fabrik 3 Filter (mono): Added Fabrik modelling.
- 530 with Fabrik 3 [Placeholder] Filter (mono): Initial release
- AV5150 Dimensions: Initial release
- AV5150 Filter (stereo): Initial release
- Afekt Dimensions: Initial release
- Afekt Filter (stereo): Initial release
- Akudorik Exakt Filter (mono): Removed NaN entries.
- Akudorik Exakt Filter (mono): Updated to be phase only on Supertweeter and 4th order phase only on bass.
- Akurate 226 Dimensions: Initial release
- Akurate226 Filter (stereo): Initial release
- Exakt Compiler: Added Fabrik compensation for drive units in sealed speakers.
- Exakt Compiler: Optimised measurement retrieval.
- Exaktbox Sub Firmware (Stereo): Initial release
- Majik 126 Dimensions: Initial release
- Majik 126 Filter (stereo): Initial release
- Melodik Dimensions: Initial release
- Melodik Filter (stereo): Initial release
- Reference 5 Dimensions: Initial release
- Reference 5 Quad-amped, Short-port Filter (mono): Initial release
- Reference 5 Quad-amped, Short-port Filter (stereo): Initial release
- Reference 5 Tri-amped, Short-port Filter (mono): Initial release
- Reference 5 Tri-amped, Short-port Filter (stereo): Initial release
- Sizmik Dimensions: Initial release
- Sizmik Filter (stereo): Initial release
20 Aug 2015
- 520 Firmware: Added ability to change DAC type and operational mode.
- 530 Firmware: Added ability to change DAC type and operational mode.
- Akubarik Exakt Firmware: Added ability to change DAC type and operational mode.
- Akudorik Exakt Filter (mono): Improved drive unit modelling.
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Added ability to change DAC type and operational mode.
- Akurate Exaktbox 6 Firmware (Mono): Added ability to change DAC type and operational mode.
- Akurate Exaktbox 6 Firmware (Stereo): Added ability to change DAC type and operational mode.
- Akurate Exaktbox 6 Firmware (Stereo): Added downmixing capability.
- Akurate Exaktbox Firmware (Stereo): Added ability to change DAC type and operational mode.
- Exakt Compiler: Added support for improved drive unit modelling for ported speakers.
- Klimax Exakt 350 Firmware (Mono): Added ability to change DAC type and operational mode.
- Klimax Exaktbox Firmware (Mono): Added ability to change DAC type and operational mode.
- Klimax Exaktbox Firmware (Stereo): Added ability to change DAC type and operational mode.
- Klimax Exaktbox Firmware (Stereo): Added downmixing capability.
- Majik 140 with Single-ended Amplifiers Filter (mono): Improved drive unit modelling.
- Majik 140 with Single-ended Amplifiers Filter (stereo): Improved drive unit modelling.
- Majik Exaktbox-I Firmware (Stereo): Added ability to change DAC type and operational mode.
18 Aug 2015
- Akurate Exaktbox Firmware (Stereo): Added support for enabling and disabling internal power amplifiers.
- Majik Exaktbox-I Firmware (Stereo): Added support for enabling and disabling internal power amplifiers.
17 Aug 2015
- 530 Dimensions: Initial release
- AV5140 with Tweeter 015 Filter (stereo): Initial release
- AV5140 with Tweeter 038 Filter (stereo): Initial release
- Akudorik Filter (stereo): Initial release
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Filter (stereo): Initial release
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (stereo): Initial release
- B&W 802D Quad-amped Filter (stereo): Initial release
- B&W 802D Tri-amped Filter (stereo): Initial release
- Espek Filter (stereo): Initial release
- Kaber with Tweeter 015 & Subwoofer Filter (stereo): Initial release
- Kaber with Tweeter 015 Filter (stereo): Initial release
- Kaber with Tweeter 038 & Subwoofer Filter (stereo): Initial release
- Kaber with Tweeter 038 Filter (stereo): Initial release
- Katan Filter (stereo): Initial release
- Keilidh Bi-amped Bass Filter (stereo): Initial release
- Keilidh Tri-amped Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Initial release
- Kudos Super 10 Filter (stereo): Initial release
- Kudos Super 20 Filter (stereo): Initial release
- Kudos Titan 808 Filter (stereo): Initial release
- Majik 109 Filter (stereo): Initial release
- Majik 140 with Single-ended Amplifiers Filter (stereo): Initial release
- Majik Exaktbox-I Firmware (Stereo): Maintenance release.
- Majik Isobarik with Single-ended Amplifiers Filter (stereo): Initial release
- Nautilus Filter (stereo): Initial release
- Ninka Bi-amped Bass Filter (stereo): Initial release
- Ninka Tri-amped Filter (stereo): Initial release
30 Jul 2015
- 520 Dimensions: Initial release
21 Jul 2015
- 520 Integrated Exakt Firmware: Maintenance release.
- 530 Integrated Exakt Firmware: Maintenance release.
15 Jun 2015
- AV5140 with Tweeter 015 Filter (stereo): Initial release
- AV5140 with Tweeter 038 Filter (stereo): Initial release
- Akubarik Filter (mono): Initial release
- Akudorik Filter (mono): Initial release
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers & Subwoofer Filter (mono): Initial release
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Filter (mono): Initial release
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers & Subwoofer Filter (mono): Initial release
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (mono): Initial release
- Akurate 242 (Serial Number 1144285 or earlier) Filter (mono): Initial release
- Akurate 242 (Serial Number after 1144285) Filter (mono): Initial release
- Akurate Exaktbox 6 Firmware (Mono): Maintenance release.
- Akurate Exaktbox 6 Firmware (Stereo): Maintenance release.
- B&W 802D Quad-amped Filter (mono): Initial release
- B&W 802D Tri-amped Filter (stereo): Initial release
- Espek Filter (mono): Initial release
- Espek Filter (stereo): Initial release
- Kaber with Tweeter 015 & Subwoofer Filter (mono): Initial release
- Kaber with Tweeter 015 Filter (stereo): Initial release
- Kaber with Tweeter 038 & Subwoofer Filter (mono): Initial release
- Kaber with Tweeter 038 Filter (stereo): Initial release
- Katan Filter (mono): Initial release
- Katan Filter (stereo): Initial release
- Keilidh Bi-amped Bass Filter (stereo): Initial release
- Keilidh Tri-amped Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (mono): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (mono): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (mono): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (mono): Initial release
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Initial release
- Klimax 350 with Balanced Amplifiers Filter (mono): Initial release
- Komri with Balanced Amplifiers Filter (mono): Initial release
- Kudos Super 10 Filter (stereo): Initial release
- Kudos Super 20 Filter (stereo): Initial release
- Kudos Titan 808 Filter (stereo): Initial release
- Majik 109 Filter (stereo): Initial release
- Majik 140 with Single-ended Amplifiers Filter (mono): Initial release
- Majik Isobarik with Single-ended Amplifiers Filter (mono): Initial release
- Nautilus Filter (mono): Initial release
- Ninka Bi-amped Bass Filter (stereo): Initial release
- Ninka Tri-amped Filter (stereo): Initial release
19 May 2015
- Espek Filter (mono): Initial release
- Katan Filter (mono): Initial release
- Kudos Super 10 Dimensions: Initial release
- Kudos Super 10 Filter (stereo): Initial release
- Kudos Super 20 Dimensions: Initial release
- Kudos Super 20 Filter (stereo): Initial release
- Kudos Titan 808 Dimensions: Initial release
- Kudos Titan 808 Filter (stereo): Initial release
22 Apr 2015
- Akubarik Exakt Firmware: Maintenance release.
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Maintenance release.
- Kaber with Tweeter 015 & Subwoofer Filter (mono): Initial release
- Kaber with Tweeter 015 & Subwoofer Filter (stereo): Initial release
- Kaber with Tweeter 015 Filter (stereo): Changed to force roll-off of 1st order filter on bass unit.
- Kaber with Tweeter 038 & Subwoofer Filter (mono): Initial release
- Kaber with Tweeter 038 & Subwoofer Filter (stereo): Initial release
- Kaber with Tweeter 038 Filter (stereo): Initial release
- Katan Dimensions: Initial release
- Katan Filter (stereo): Initial release
- Klimax Exakt 350 Firmware (Mono): Maintenance release.
- Klimax Exaktbox Firmware (Mono): Maintenance release.
24 Mar 2015
- Majik 109 Dimensions: Initial release
- Majik 109 Filter (stereo): Initial release
10 Mar 2015
- AV5140 Dimensions: Maintenance release.
- Akubarik Dimensions: Maintenance release.
- Akudorik Dimensions: Maintenance release.
- Akurate 212 Dimensions: Maintenance release.
- Akurate 242 Dimensions: Maintenance release.
- B&W 802D Dimensions: Maintenance release.
- Espek Dimensions: Maintenance release.
- Kaber Dimensions: Maintenance release.
- Keilidh Dimensions: Maintenance release.
- Keltik Dimensions: Maintenance release.
- Klimax 350 Dimensions: Maintenance release.
- Komri Dimensions: Maintenance release.
- Majik 140 Dimensions: Maintenance release.
- Majik Isobarik Dimensions: Maintenance release.
- Nautilus Dimensions: Maintenance release.
- Ninka Dimensions: Maintenance release.
18 Feb 2015
- B&W 802D Quad-amped Filter (mono): Updated filters with reduced processing requirement.
- B&W 802D Quad-amped Filter (stereo): Updated filters with reduced processing requirement.
- B&W 802D Tri-amped Filter (stereo): Updated filters with reduced processing requirement.
- Exakt Compiler: Maintenance release.
17 Feb 2015
- B&W 802D Dimensions: Initial release
- B&W 802D Quad-amped Filter (mono): Initial release
- B&W 802D Quad-amped Filter (stereo): Initial release
- B&W 802D Tri-amped Filter (stereo): Initial release
- Exakt Compiler: Updated to be compatible with the latest Konfig (4.17 and higher).
11 Feb 2015
- Exakt Compiler: Updated to support new Keilidh filters.
03 Feb 2015
- Akubarik Exakt Firmware: Maintenance update
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Maintenance update
- Akurate Exaktbox Firmware (Stereo): Maintenance update
- Kaber Dimensions: Initial release
- Kaber with Tweeter 015 Filter (stereo): Initial release
- Klimax Exakt 350 Firmware (Mono): Maintenance update
- Klimax Exaktbox Firmware (Mono): Maintenance update
- Klimax Exaktbox Firmware (Stereo): Maintenance update
21 Jan 2015
- AV5140 Dimensions: Initial release
- AV5140 with Tweeter 015 Filter (stereo): Initial release
- AV5140 with Tweeter 038 Filter (stereo): Initial release
- Akurate Exaktbox Firmware (Stereo): Added LED flashing functionality.
- Akurate Exaktbox Firmware (Stereo): Added flash protection logic.
- Keilidh Bi-amped Bass Filter (stereo): Initial release
- Keilidh Dimensions: Initial release
- Keilidh Tri-amped Filter (stereo): Initial release
- Klimax Exaktbox Firmware (Stereo): Added LED flashing functionality.
- Klimax Exaktbox Firmware (Stereo): Added flash protection logic.
10 Dec 2014
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers & Subwoofer Filter (mono): Updated to include the correct number of output channels.
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers & Subwoofer Filter (stereo): Updated to include the correct number of output channels.
- Ninka Tri-amped Filter (stereo): Increased the number of filters used to match the number of drive units.
09 Dec 2014
- Akurate 212 (Serial Number 1144285 or earlier) Filter (mono): Initial release
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers & Subwoofer Filter (mono): Initial release
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers & Subwoofer Filter (stereo): Initial release
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Filter (mono): Initial release
- Akurate 212 (Serial Number 1144285 or earlier) with Single-ended Amplifiers Filter (stereo): Initial release
- Ninka Bi-amped Bass Filter (stereo): Initial release
- Ninka Dimensions: Initial release
- Ninka Tri-amped Filter (stereo): Initial release
27 Nov 2014
- Exakt Compiler: Fixed artifacts in upper bass frequency response for Akurate 242 speakers.
19 Nov 2014
- Akurate 242 (Serial Number 1144285 or earlier) Filter (mono): Initial release
- Akurate 242 (Serial Number 1144285 or earlier) Filter (stereo): Initial release
17 Nov 2014
- Exakt Compiler: Fixed optimisation crash when when room dimensions are set to 0
30 Oct 2014
- Majik Isobarik Dimensions: Fixed incorrect drive unit name.
- Majik Isobarik Dimensions: Improved port filter frequencies.
28 Oct 2014
- Akubarik Exakt Firmware: Fixed defect #3643: Fixed bug where Exakt device settings were occasionally incorrect.
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Fixed defect #3643: Fixed bug where Exakt device settings were occasionally incorrect.
- Akurate Exaktbox Firmware (Stereo): Fixed defect #3643: Fixed bug where Exakt device settings were occasionally incorrect.
- Klimax Exakt 350 Firmware (Mono): Fixed defect #3643: Fixed bug where Exakt device settings were occasionally incorrect.
- Klimax Exaktbox Firmware (Mono): Fixed defect #3643: Fixed bug where Exakt device settings were occasionally incorrect.
- Klimax Exaktbox Firmware (Stereo): Fixed defect #3643: Fixed bug where Exakt device settings were occasionally incorrect.
- Majik Isobarik Dimensions: Initial release
- Majik Isobarik with Single-ended Amplifiers Filter (mono): Initial release
- Majik Isobarik with Single-ended Amplifiers Filter (stereo): Initial release
22 Oct 2014
- Majik 140 Dimensions: Initial release.
- Majik 140 with Single-ended Amplifiers Filter (mono): Initial release.
- Majik 140 with Single-ended Amplifiers Filter (stereo): Initial release.
08 Oct 2014
- Akubarik Exakt Firmware: Fixed defect #3641: Every 7 minutes a tick can be heard through speakers connected to an Exaktbox.
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Fixed defect #3641: Every 7 minutes a tick can be heard through speakers connected to an Exaktbox.
- Akurate Exaktbox Firmware (Stereo): Fixed defect #3641: Every 7 minutes a tick can be heard through speakers connected to an Exaktbox.
- Klimax Exakt 350 Firmware (Mono): Fixed defect #3641: Every 7 minutes a tick can be heard through speakers connected to an Exaktbox.
- Klimax Exaktbox Firmware (Mono): Fixed defect #3641: Every 7 minutes a tick can be heard through speakers connected to an Exaktbox.
- Klimax Exaktbox Firmware (Stereo): Fixed defect #3641: Every 7 minutes a tick can be heard through speakers connected to an Exaktbox.
25 Sep 2014
- Exakt Compiler: Added support for second order low and high pass filters in the design of the EQ sections of the crossover.
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (mono): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (mono): Initial release
- Keltik Bi-amped Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (mono): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (mono): Initial release
- Keltik Bi-amped Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Initial release
- Nautilus Filter (mono): Initial release
- Nautilus Filter (stereo): Initial release
17 Sep 2014
- Akubarik Exakt Firmware: Fixed issue where left channel was occasionally silent on exit from standby.
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Fixed issue where left channel was occasionally silent on exit from standby.
- Akurate Exaktbox Firmware (Stereo): Fixed issue where left channel was occasionally silent on exit from standby.
- Exakt Compiler: Supports device measurements version 3.
- Klimax Exakt 350 Firmware (Mono): Fixed issue where left channel was occasionally silent on exit from standby.
- Klimax Exaktbox Firmware (Mono): Fixed issue where left channel was occasionally silent on exit from standby.
- Klimax Exaktbox Firmware (Stereo): Fixed issue where left channel was occasionally silent on exit from standby.
- Nautilus Dimensions: Initial release
16 Sep 2014
- Akubarik Dimensions: Initial release
- Akubarik Exakt Filter (mono): Initial release
- Akubarik Exakt Firmware: Initial release
- Akubarik Filter (mono): Initial release
- Akubarik Filter (stereo): Initial release
- Akudorik Dimensions: Initial release
- Akudorik Exakt Filter (mono): Initial release
- Akudorik Exakt and Dorik Exakt Upgrade Stand Firmware (Mono): Initial release
- Akudorik Filter (mono): Initial release
- Akudorik Filter (stereo): Initial release
- Akudorik Passive Filter (mono): Initial release
- Akurate 212 (Serial Number after 1144285) Filter (mono): Initial release
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers & Subwoofer Filter (mono): Initial release
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers & Subwoofer Filter (stereo): Initial release
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (mono): Initial release
- Akurate 212 (Serial Number after 1144285) with Single-ended Amplifiers Filter (stereo): Initial release
- Akurate 212 Dimensions: Initial release
- Akurate 242 (Serial Number after 1144285) Filter (mono): Initial release
- Akurate 242 (Serial Number after 1144285) Filter (stereo): Initial release
- Akurate 242 Dimensions: Initial release
- Akurate Exaktbox Firmware (Stereo): Initial release
- Espek Dimensions: Initial release
- Espek Filter (stereo): Initial release
- Exakt Compiler: Initial release
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 007 & Tweeter 038 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 015 Filter (stereo): Initial release
- Keltik Bi-wired Bass with Mid-range 081 & Tweeter 038 Filter (stereo): Initial release
- Keltik Dimensions: Initial release
- Klimax 350 Dimensions: Initial release
- Klimax 350 Exakt Filter (mono): Initial release
- Klimax 350 Filter (stereo): Initial release
- Klimax 350 with Balanced Amplifiers Filter (mono): Initial release
- Klimax 350 with Single-ended Amplifiers Filter (mono): Initial release
- Klimax Exakt 350 Firmware (Mono): Initial release
- Klimax Exaktbox Firmware (Mono): Initial release
- Klimax Exaktbox Firmware (Stereo): Initial release
- Komri Dimensions: Initial release
- Komri Filter (stereo): Initial release
- Komri with Balanced Amplifiers Filter (mono): Initial release
- Komri with Single-ended Amplifiers Filter (mono): Initial release