Difference between revisions of "Majik DS"

POWER SWITCH- To switch the power on/off.
MAINS INPUT - To connect to the mains electricity supply.
EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
ETHERNET - To connect to a network.
FALLBACK - To put the device into Fallback mode (used when reprogramming).
RS232 PORTS - To connect to other Linn devices that don't have ethernet.
SPDIF OUT - To connect to an external DAC or computer that has an Spdif input.
TOSLINK OUT - To connect to an external DAC or computer that has a TOSLINK input.
ANALOGUE AUDIO OUTPUTS - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.

Front Panel Connections

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

For further assistance, try our customer support pages or the Linn Forum.

@@ Line 61: / Line 61: @@
 # '''SPDIF OUT''' - To connect to an external DAC or computer that has an Spdif input.
 # '''TOSLINK OUT''' - To connect to an external DAC or computer that has a TOSLINK input.
-# '''ANALOGUE AUDIO OUTPUTS''' -  To connect to a preamplifier with unbalanced (RCA) analogue audio inputs.
+# '''ANALOGUE AUDIO OUTPUTS''' -  To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
 <br>