Majik DS-I

Product info

• Product Name: Majik DS-I

• Date of Introduction: October 2009

• Type: Integrated digital music player, preamplifier and power amplifier.

• Features
  • DS Design
  • Chakra Power
  • Dynamik Power Supply
  • Aktiv Operation
  • Source Unity Gain option

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

Remote Control manual

Kinsky Jukebox manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

Network Setup

• DS Budget System Setup
• DS Entry Level System Setup
• DS High End System Setup

Back Panel Connections

1. POWER SWITCH- Switches the power on/off.
2. MAINS INPUT - To connect to the mains electricity supply.
3. DIGITAL INPUTS (Spdif) - To connect sources with Spdif (RCA) digital outputs.
4. DIGITAL OUTPUT (Spdif) - To connect to an external DAC or computer that has an Spdif digital input.
5. DIGITAL INPUTS (Toslink) - To connect sources with Toslink (optical) digital outputs.
6. EARTH GROUND - To connect to a turntable grounding terminal, or an earthing terminal if no mains earth is available, or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
7. DIGITAL OUTPUT (Toslink) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
8. SPEAKER OUTPUTS - To connect to loudspeakers
9. IR OUTPUTS - To connect to infrared flasher devices allowing control of other products that accept infra-red signals.
10. ETHERNET - To connect to a network.
11. FALLBACK - To put the device into Fallback mode (used when reprogramming)
12. RS232 PORTS - For connection to Linn source products without ethernet ports.
13. ANALOGUE INPUTS (RCA, line level) - To connect sources with unbalanced (RCA) analogue outputs. Input 4 is a configurable input, which is factory set as a moving magnet phono input for connection to turntables. It can be changed by a Linn dealer to a line-level input or a moving coil phono input (moving coil is an optional upgrade).
14. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
15. ANALOGUE OUTPUTS (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.

Front Panel Connections

1. MUTE BUTTON - Mutes/unmutes the audio
2. FRONT PANEL DISPLAY
3. STANDBY BUTTON - Brings the unit in/out of standby
4. VOLUME ADJUST BUTTONS - Changes the volume up/down
5. HEADPHONE OUTPUT (3.5mm stereo) - To connect to headphones
6. AUXILIARY SOURCE INPUT (3.5mm stereo) - To connect to an analogue stereo audio source
7. SOURCE ADJUST BUTTONS - Changes to the previous/next source

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

• Unpacking - Please read the information on unpacking your Majik DS-I.

• Positioning - Please read the information on positioning your Majik DS-I.

• Adjustment - The Majik DS-I has LIPSYNC functions on the external inputs Lipsync

• Important Information:Protection - The Majik DS-I features over-current and over-temperature protection

• Important Information:Phono Stage - The Majik DS-I integrated amplifier includes a phono input, which allows connection of a phono turntable. LINE INPUT 4 / PHONO can be configured to operate as a moving-magnet (MM) or moving-coil (MC) phono stage (optional upgrade) or an extra ‘line-level’ input.

For further assistance, try our customer support pages or the Linn Forum.