Difference between revisions of "Sneaky Music DS"
(→Back Panel Connections) |
(→Back Panel Connections) |
||
| Line 43: | Line 43: | ||
# '''MAINS INPUT''' - To connect to the mains electricity supply. | # '''MAINS INPUT''' - To connect to the mains electricity supply. | ||
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions. | # '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions. | ||
| − | # '''SPEAKER OUTPUTS | + | # '''SPEAKER OUTPUTS''' - Amplified output for connection to loudspeakers |
# '''ANALOGUE OUTPUTS''' (RCA, variable/fixed level) - To connection to a preamplifier or power amplifier if the internal volume control is enabled. | # '''ANALOGUE OUTPUTS''' (RCA, variable/fixed level) - To connection to a preamplifier or power amplifier if the internal volume control is enabled. | ||
# '''DIGITAL OUT''' (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input. | # '''DIGITAL OUT''' (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input. | ||
Revision as of 17:39, 14 December 2010
Contents
Product info
- Product Name: Sneaky Music DS
- Date of Introduction: March 2008
- Type: Network Music Player.
- Features
Latest software
Manuals
Production Information Sheet, including Product Specifications
System Setup
Network setup guide.
Back Panel Connections
- MAINS INPUT - To connect to the mains electricity supply.
- EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
- SPEAKER OUTPUTS - Amplified output for connection to loudspeakers
- ANALOGUE OUTPUTS (RCA, variable/fixed level) - To connection to a preamplifier or power amplifier if the internal volume control is enabled.
- DIGITAL OUT (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
- DIGITAL OUT (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
- RCU ACCESSORY - To connect to a Linn BASIK3 or BASIK3-IR Knekt control device.
- RS232 PORTS - To connect to other Linn devices that don't have ethernet.
- FALLBACK - To put the device into Fallback mode (used when reprogramming)
- ETHERNET - To connect to a network.
Front Panel Connections
Product status is indicated by the LED behind the Linn badge, default settings are shown below.
LED OFF - no power
LED ON DIM - product in standby
LED ON BRIGHT - product is active
LED SLOW FLASH - searching for IP address (boot)
LED FAST FLASH - fallback (re-programme)
Note: LED may be turned off using Linn Konfig.
Installation
Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.
- Unpacking - Please read the information on unpacking your Sneaky Music DS.
- Positioning - Please read the information on positioning your Sneaky Music DS.
- Important Information:Protection - The Sneaky Music DS features over-current and over-temperature protection
For further assistance, try our customer support pages or the Linn Forum.
