Difference between revisions of "Majik DS"

From LinnDocs
Jump to: navigation, search
Line 41: Line 41:
 
[[Image:Majik DS rear.jpg|center|731x222px|Image:Majik_DS_rear.jpg]] <br>
 
[[Image:Majik DS rear.jpg|center|731x222px|Image:Majik_DS_rear.jpg]] <br>
  
−
# '''POWER SWITCH'''- For switching the power to the unit on and off
+
# '''POWER SWITCH'''- For switching the power to the unit on and off.
−
# '''MAINS INPUT''' - For connection to the mains supply. See Connecting to the mains supply.
+
# '''MAINS INPUT''' - For connection to the mains supply.  
−
# '''SPDIF IN 1 to 3''' - For connection to digital electrical (coaxial) source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
 
−
# '''SPDIF OUT''' - For connecting to a device with a digital electrical (coaxial) recording device.
 
−
# '''TOSLINK IN 1 to 3''' - For connection to digital optical source products, such as a CD players, Set-top boxes, games consoles, DVD players etc.
 
 
# '''EARTH GROUND''' - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
 
# '''EARTH GROUND''' - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
−
# '''TOSLINK OUT''' - For connecting to a device with a digital optical recording device.
 
−
# '''RIGHT, LEFT SPEAKER''' - Amplified output for connection to loudspeakers
 
−
# '''IR OUT 1 &amp; 2''''- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.
 
 
# '''ETHERNET''' - For connecting the unit to the Internet router.
 
# '''ETHERNET''' - For connecting the unit to the Internet router.
 
# '''FALLBACK''' - Used when reprogramming the unit.
 
# '''FALLBACK''' - Used when reprogramming the unit.
 
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
 
# '''RS232 PORTS''' - For connection to Linn source products without ethernet ports.
−
# '''ANALOGUE AUDIO INPUTS 1 to 4''' - For connection to line-level source products, such as a CD player, radiotuner, tape deck, etc. INPUT 4 can be configured as a moving-magnet, moving-coil or line-level input (the factory setting is moving-magnet).
+
# '''SPDIF OUT''' - For connecting to an external device with a digital electrical (coaxial) input.
−
# '''PRE OUT''' - Line-level outputs for connection to an external power amplifier in a multi-amp or aktiv system.
+
# '''TOSLINK OUT''' - For connecting to an external device with a digital optical input.
−
# '''LINE OUT''' - Fixed volume outputs for connection to a tape recorder or other analogue recording device.
+
# '''ANALOGUE AUDIO OUTPUTS''' - Analogue audio outputs for connecting to a pre-amplifier or directly to speakers if the Internal Volume Control is enabled.
 +
# '''IR OUT 1 &amp; 2''''- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.
  
 
== '''Front Panel Connections''' ==
 
== '''Front Panel Connections''' ==

Revision as of 16:18, 29 October 2009

MajikDS Silv 3QRight RGB 72DPI.jpg

Product info

  • Product Name: Majik DS
  • Date of Introduction:June 2008
  • Type: Digital Stream Player.

Latest software

Latest software releases

Open source software

Manuals

Kinsky Desktop manual

Linn Konfig manual

Production Information Sheet, including Product Specifications

Generic Safety Information

On-line warranty registration

System Setup

Recommended DS Network setup guide


Back Panel Connections

Image:Majik_DS_rear.jpg


  1. POWER SWITCH- For switching the power to the unit on and off.
  2. MAINS INPUT - For connection to the mains supply.
  3. EARTH GROUND - For connecting the earthing lead from the tonearm cable of a turntable, if required. Also for connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  4. ETHERNET - For connecting the unit to the Internet router.
  5. FALLBACK - Used when reprogramming the unit.
  6. RS232 PORTS - For connection to Linn source products without ethernet ports.
  7. SPDIF OUT - For connecting to an external device with a digital electrical (coaxial) input.
  8. TOSLINK OUT - For connecting to an external device with a digital optical input.
  9. ANALOGUE AUDIO OUTPUTS - Analogue audio outputs for connecting to a pre-amplifier or directly to speakers if the Internal Volume Control is enabled.
  10. IR OUT 1 & 2'- Infrared flasher connectors. Allow the control via the handset of devices that accept infra-red signals.

Front Panel Connections

Majik DS front.jpg
  1. MUTE BUTTON - Mutes and un-mutes the volume
  2. FRONT PANEL DISPLAY
  3. STANDBY BUTTON - Brings the unit out of, or puts into, standby
  4. VOLUME -/+ - Adjust the volume level
  5. SOURCE -/+ - Changes Sources

Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Majik DS.
  • Positioning - Please read the information on positioning your Majik DS.
  • Important Information:Protection - The Majik DS-I features over-current and over-temperature protection

For further assistance, try our customer support pages or the Linn Forum.

Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Majik_DS&oldid=3144"