Difference between revisions of "Troubleshooting:360 PWAB"
m |
m |
||
| Line 1: | Line 1: | ||
| − | ==No audio from the Bass loudspeaker== | + | ====No audio from the Bass loudspeaker==== |
:The 360 PWAB takes it feed from either the 4 mm Upper Bass terminals or the XLR or XLR socket. If you have not sound, check that the 360 switch is set for the correct input. | :The 360 PWAB takes it feed from either the 4 mm Upper Bass terminals or the XLR or XLR socket. If you have not sound, check that the 360 switch is set for the correct input. | ||
:The 360 speaker also has a set of covered Exakt sockets to allow for updating the software in the Aktiv Bass amplifier. If the 360 PWAB is powered on with the Exakt-link connected, it will think it is in software upload mode and not process any analogue audio. Unplug the Exakt-link from the 360 loudspeaker and power cycle the loudspeaker, bass audio will return. | :The 360 speaker also has a set of covered Exakt sockets to allow for updating the software in the Aktiv Bass amplifier. If the 360 PWAB is powered on with the Exakt-link connected, it will think it is in software upload mode and not process any analogue audio. Unplug the Exakt-link from the 360 loudspeaker and power cycle the loudspeaker, bass audio will return. | ||
Revision as of 13:06, 3 August 2023
No audio from the Bass loudspeaker
- The 360 PWAB takes it feed from either the 4 mm Upper Bass terminals or the XLR or XLR socket. If you have not sound, check that the 360 switch is set for the correct input.
- The 360 speaker also has a set of covered Exakt sockets to allow for updating the software in the Aktiv Bass amplifier. If the 360 PWAB is powered on with the Exakt-link connected, it will think it is in software upload mode and not process any analogue audio. Unplug the Exakt-link from the 360 loudspeaker and power cycle the loudspeaker, bass audio will return.
