Difference between revisions of "Configuration:Change Configuration"

Revision as of 13:39, 6 September 2022

lEFT

This is depends on the Exakt product you are configuring.

Typically you will have:

Mono: To work as an Exakt crossover for one loudspeaker

Stereo: To work as an Exakt crossover for a pair of loudspeakers

Stereo Passthrough: ONLY for Selekt DSM. This will allow each cartridge to Play the same stereo audio channels with no crossover filtering.

Surround Passthrough: This defines the Surround channels assigned and what loudspeaker

Channel: This refers to the audio channel for this/these loudspeakers.

If you have set for Mono mode above, this will show single channels, FL, FR, Cen...

If you have defined

Manufacturer:

Channel:

@@ Line 3: / Line 3: @@
 <br><br>
-[[Image:KK_Select_Mode.png| right |250px|link=]]
+[[Image:KK_Select_Mode.png| right |200px|link=]]
-=====Select Mode=====
+=====<u>Select Mode</u>=====
-:This is depends on the Exakt product you are configuring. Typically you will have
+This is depends on the Exakt product you are configuring.
+:Typically you will have:
 ::<b>Mono</b>: To work as an Exakt crossover for one loudspeaker
 ::<b>Stereo</b>: To work as an Exakt crossover for a pair of loudspeakers
-::<b>Stereo Passthrough</b>: ONLY for Selekt DSM. This will allow each cartridge to Play LHC & RHC audio with no crossover filtering.
+::<b>Stereo Passthrough</b>: ONLY for Selekt DSM. This will allow each cartridge to Play the same stereo audio channels with no crossover filtering.
 ::<b>Surround Passthrough</b>: This defines the Surround channels assigned and what loudspeaker
+<br><br><br>
+[[Image:Kk_Select_Spkr.png| right |200px|link=]]
+=====<u>Selekt Speaker</u>=====
+::<b>Channel</b>: This refers to the audio channel for this/these loudspeakers.
+::::If you have set for Mono mode above, this will show single channels, FL, FR, Cen...
+::::If you have defined
+::<b>Manufacturer</b>:
+::<b>Channel</b>: