Difference between revisions of "Songcast"
(Songcast Trouble shooting) |
(→Songcast Trouble shooting) |
||
Line 73: | Line 73: | ||
Songcast is designed to be playback to music as close to real-time as possible. The [[Konfig_Manual#Delay_Mode|DELAY mode]] determines the delay of the original music playback to the listening room. | Songcast is designed to be playback to music as close to real-time as possible. The [[Konfig_Manual#Delay_Mode|DELAY mode]] determines the delay of the original music playback to the listening room. | ||
The Listener DS/DSM keeps track of the timing of the audio from the Sender DS/DSM to make sure that the audio is in sync. | The Listener DS/DSM keeps track of the timing of the audio from the Sender DS/DSM to make sure that the audio is in sync. | ||
− | If the local area network (LAN), causes delays/latency in the music data packets this may cause | + | <br> |
+ | If the local area network (LAN), causes delays/latency in the music data packets this may cause the music playback to be out of sync with the audio timings. The Linn DS/DSM will reject the audio and mute. <br> | ||
+ | Different tracks within a Playlist may require different bandwidth, a Studio Master will require a lot more bandwidth than an 128k MP3 file. If your MP3 files are also being muted, suspect delays/latency on your LAN | ||
+ | |||
+ | |||
1 Check the LAN connections between the Linn DS/DSM products have the full 100M bandwidth. | 1 Check the LAN connections between the Linn DS/DSM products have the full 100M bandwidth. |
Revision as of 10:41, 30 April 2015
How to Songcast
Initial Setup
- Your DS must be running Davaar 1 firmware or higher.
- You will require a Davaar compatible Linn Konfig to update and configure your DS
- You will require Davaar compatible control software to control your DS
Using Kinsky
- Insure you have installed Kinsky Davaar
- Select the Songcast source on a DS (similar to Playlist or Radio)
- Select the Songcast sender from the list that you wish to listen to
Using the handset (REM 019)
- Configure each Songcast sender in your home to have a unique preset number using Linn Konfig.
- Select the Songcast source on a DS (GOTO/Sat button will select the source directly)
- Enter the preset number that corresponds to the Songcast sender you wish to listen to
SONGCAST Soundcard on a PC/MAC
You can broadcast the audio that is playing on your PC/MAC to your Linn DS by using the software listed Here
- Setup Songcast Manual
This audio is broadcast from your PC/MAC as dictated by your computers audio sub-system. For Windows7 this is typically 44.1k/16bit and for a OSX Lion 44.1k/16bit.(On a Mac check the "About this Mac" to find out the details)
SongCast Trouble shooting
- If you have two or more DS's in the same system make sure that each DS has it own Room name. E.g. if you have 2 DS's with the name Main, then Songcast doesn't know which one to send it to. So check the Room names first
- Some firewalls will block any Songcast broadcast is you are on a Public network. on Windows7, click on your Control panel "Network and Internet" - "View network status and tasks" and make sure that you active network is either Domain, Private or work and NOT PUBLIC (Instructions on how to change Network type)
- Check that you have the streaming option enabled on you Windows7
- Control panel
- "Network sharing center" -
- "Change advanced sharing settings"
- Select your network type "Home or Work", "Public" or "Domain"
- Media Streaming - Choose Media Streaming options and select "Allow All"
- Select your network type "Home or Work", "Public" or "Domain"
- "Change advanced sharing settings"
- "Network sharing center" -
- and OK exit out of these options
- Audio muting when playing from the PC/MAC songcast
- if you are connecting the PC using a Wireless connection this may be intermittently loosing connection. This may be causing the muting as the DS is waiting for the Music stream.
Check
- That your Wireless connection, try one of these Network apps to find out what is interfering with your Wifi*
- In the PC/MAC Songcast app, go into Advanced settings and increase the Audio Latency, this is typically 300mS, try increasing this to 1000 (maximum 2000) to see if this improves things (This will allow the network to catch up on any lost information if the Songcast is setup for Unicast broadcasts)
- In Windows, go into Device Manager, Network adaptors, both Wifi and Lan check:
- a. Power Management - Allow the Computer to turn off this device to save power is DISABLES
- b. Advanced - Priority and VLAN - both disabled
Known Issues with Songcast V4.10
- If you have a PC name with non-ASCII characters (accented characters etc), the Songcast PC/MAC could not connect to and keeps on attemping to connect. Try to rename your PC/MAC using a,b,c,.. 1,2,3... etc, this should now allow your PC to connect to the DS
Known issue with Songcast V4.3.3.
- If you have 2 or more DS's make sure that they have different ROOM names
- It has been noted on some PC's/MAC, that selecting the DS within Songcast causes the indicator to keep spinning and not connect to the Linn DS.
As a first check:
- Select the Songcast options:
- Select Advanced tab, and check that the Network settings - connection is correct
- Select the General Tab and Refresh the Songcast Receiver section
- Then reselect your Linn DS
- Close this and retry your DS connection
If this has the same result download V4.3.2 and install from this site
MAC connecting with Songcast on wake-up
If the Songbox is set to Wireless connection and using a Lion OSX MAC, it has been reported that waking the MAC up will have the MAC automatically connecting with Songcast to the default DS. The solution is always make the Songcast connection on a wired LAN.
Kinsky crashes on PC/MAC/iPad/Android
If you are running Songcast on a PC/MAC then we suspect that Computer name is blank. (The Songcast app uses the name of your computer when constructing some metadata that it publishes onto your local network. The name of your computer is coming through as "<unknown>" which is exposing a bug in Songcast (present 4.3.4))
You should be able to see your computer's name from
- MAC "System Preferences -> Sharing"
- PC "Control panel -> System and Security -> System.
If it is a case that this name is simply blank, setting it to something like "Alex's Mac" might then resolve your issue.
Songcast Trouble shooting
Songcast is designed to be playback to music as close to real-time as possible. The DELAY mode determines the delay of the original music playback to the listening room.
The Listener DS/DSM keeps track of the timing of the audio from the Sender DS/DSM to make sure that the audio is in sync.
If the local area network (LAN), causes delays/latency in the music data packets this may cause the music playback to be out of sync with the audio timings. The Linn DS/DSM will reject the audio and mute.
Different tracks within a Playlist may require different bandwidth, a Studio Master will require a lot more bandwidth than an 128k MP3 file. If your MP3 files are also being muted, suspect delays/latency on your LAN
1 Check the LAN connections between the Linn DS/DSM products have the full 100M bandwidth.
2 Check the latency delays between all of the LInn DS/DSM products is low ( <50mS ).
- Windows Tools such as [NetworkingApplications|PSTOOLS/PSPING} are good for this with commands lines such as:
- psping -q -w 5 -l 8192 -i 0 -n 10000 -h 10 192.168.1.23
- psping -q -w 5 -l 8192 -i 0 -n 10000 -h 10 192.168.1.23
- where 192.168.1.23 is the IP of one of the Linn DS/DSM's
- Network bridging devices such as Ethernet-Over-Mains devices or Wifi bridges can cause latency delays so we advice not to use them if you are using Songcast or Internet Radio
3 If you LAN can only support UNICAST make sure that in Konfig for each LInn DS/DSM that SONGCAST is set for UNICAST and NOT MULTICAST
4 If you LAN does support Multicast, make sure that this is correctly enabled of your LAN and within Konfig>Songcast that Multicast is enabled