Difference between revisions of "DS Entry Level System"
| Line 19: | Line 19: | ||
*Linn DS | *Linn DS | ||
*NAS | *NAS | ||
| − | |||
Notes: | Notes: | ||
| Line 30: | Line 29: | ||
==Step 1: Connect Home Computer To Router== | ==Step 1: Connect Home Computer To Router== | ||
| − | |||
#Connect the home computer to the router. | #Connect the home computer to the router. | ||
| Line 72: | Line 70: | ||
#Download Kinsky Desktop from [http://www.linn.co.uk/kinskydesktop here] | #Download Kinsky Desktop from [http://www.linn.co.uk/kinskydesktop here] | ||
#Install Kinsky Desktop onto the home computer | #Install Kinsky Desktop onto the home computer | ||
| − | |||
#View the Kinsky Desktop manual [http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual here] | #View the Kinsky Desktop manual [http://oss.linn.co.uk/trac/wiki/KinskyDesktopManual here] | ||
Revision as of 11:43, 5 November 2010
Contents
Introduction
This is a recommended guide to setting up an entry level Linn DS system, requiring you to purchase some network components in order to build the recommended system.
It is advisable to follow the instructions step by step to ensure that each part of the system is working before moving on to the next. By doing this, it simplifies the setup process and allows for any problems encountered to be more easily identified and resolved.
Required Components
The following components are required for the system detailed in this page:
- Router
- Home computer
- Linn DS
- NAS
Notes:
- Ethernet cables are required to connect devices
- Router is required to have built in network switch and feature address reservation
- NAS is required to have media server software and backup support
- If a wireless router is being used, n band WAP support is recommended
Step 1: Connect Home Computer To Router
- Connect the home computer to the router.
- Configure the router to the recommended settings.
The home computer’s network adapter should already be configured to ‘obtain an IP address automatically’.
Step 2: Connect NAS To Router
- Connect the NAS to the router
- Ensure the DHCP server is disabled on the NAS
- Configure the NAS to ‘obtain an IP address automatically’
Step 3: Connect Linn DS To Router
- Connect the Linn DS to the router
- Power on the Linn DS.
Step 4: Install Linn DS Control Software On Home Computer
- Download Kinsky Desktop from here
- Install Kinsky Desktop onto the home computer
- View the Kinsky Desktop manual here
Step 5: Adding Wireless Control
If desired, a wireless access point (WAP) can be added to the network to allow wireless control of the Linn DS through a portable, wireless enabled control point (such as a laptop, mobile phone, etc.).
