Difference between revisions of "TroubleShooting:Selekt DSM"
m |
m |
||
| Line 7: | Line 7: | ||
<br><br> | <br><br> | ||
;If you have the correct orientation of DAC's, see above, then using Konfig | ;If you have the correct orientation of DAC's, see above, then using Konfig | ||
| + | <p> | ||
:1. Make sure that your Selekt DSM is powered on and connected to a network with internet access. | :1. Make sure that your Selekt DSM is powered on and connected to a network with internet access. | ||
:2. In Konfig, select your DSM and go into the {{border|<b> Exakt </b>|width=2px| style2=padding:3px |color=#696969}} or {{border|<b>Speakers</b>|width=2px| style2=padding:3px |color=#696969}} tab. | :2. In Konfig, select your DSM and go into the {{border|<b> Exakt </b>|width=2px| style2=padding:3px |color=#696969}} or {{border|<b>Speakers</b>|width=2px| style2=padding:3px |color=#696969}} tab. | ||
| Line 18: | Line 19: | ||
::b) Set up the speaker info and see if normal operation has returned. | ::b) Set up the speaker info and see if normal operation has returned. | ||
::c) If not, please contact Linn Helpline. | ::c) If not, please contact Linn Helpline. | ||
| + | </p> | ||
<!-- | <!-- | ||
Revision as of 13:18, 27 October 2022
Selekt DSM does not produce any sound from the cartridge(s)
- If this is a fresh installation or you have added/changed an Selekt cartridge configuration the check you have NOT using BOTH Organik DACs AND Katalyst or Standard DAC's. The Selekt cartridges can ONLY be:
- ALL Organik DACs or
- A mixture of Katalyst or Standard DAC's
- A mixture of Organik DACs AND Katalyst or Standard DAC's will produce NO sound.
- If you have the correct orientation of DAC's, see above, then using Konfig
- 1. Make sure that your Selekt DSM is powered on and connected to a network with internet access.
- 2. In Konfig, select your DSM and go into the Exakt or Speakers tab.
- a) In the Speakers configuration box, click on the FALLBACK button. This will put the Selekt backplane into fallback mode.
- b) After a few moments, a RESTORE button should appear in the Speakers configuration box. Press this RESTORE button.
- i) If the RESTORE button does not appear after 60seconds then quit Konfig.
- ii) Re-open Konfig and go back the Exakt or Speakers tab. The RESTORE button should now be visible. Press this RESTORE button.
- c) Let it go through the programming steps (there's a progress indicator at the bottom of screen).
- 3. When it's finished:
- a) Power cycle the Selekt (Do NOT use the Reboot option in Konfig).
- b) Set up the speaker info and see if normal operation has returned.
- c) If not, please contact Linn Helpline.
