Difference between revisions of "Selekt: Bluetooth and Wifi"

From LinnDocs
Jump to: navigation, search
m (Setting up Wifi using the Pin buttons)
m (Alternative Wifi Setup Method via Web Browser)
Line 30: Line 30:
 
=== Alternative Wifi Setup Method via Web Browser ===
 
=== Alternative Wifi Setup Method via Web Browser ===
  
:1. With the Selekt DSM out of Sleep mode
+
:1. With the Selekt DSM out of Sleep mode and cable/LAN connections disconnected.
 
:2. Go to the Wireless settings on your device (e.g. iPad)
 
:2. Go to the Wireless settings on your device (e.g. iPad)
 
:3. Find the Selekt DSM on the list of available networks. It will be called Selekt DSM - <serial number>
 
:3. Find the Selekt DSM on the list of available networks. It will be called Selekt DSM - <serial number>

Revision as of 07:57, 29 April 2022

Quick setup can be done using the Pin buttons or the Selekt dial

Setting up Bluetooth using the Pin buttons

1. Select the Bluetooth menu on your device for pairing
2. Press and hold Pins 3 & 4 on the Selekt DSM until "Bluetooth: Pairing..." appears on the front panel display
3. Select the Selekt DSM from the list of available Bluetooth devices on your device for pairing

Setting up Wifi using the Pin buttons

1. Remove/disconnect any cable LAN connections from the Selekt DSM
2. Press the WPS button on your internet router
3. Press and hold Pins 2 & 5 on the Selekt DSM until "WPS: Connecting..." appears on the front panel display
4. The Selekt DSM should now automatically connect to the Wifi network
  • Press and hold Pins 1, 2 & 5 to forget the Wifi network
Selekt Dial AllPress.jpg

Setting up Bluetooth or Wifi using the Selekt dial

1. With the Selekt DSM out of Sleep mode
2. Press dial UP to enter Service menu
3. Scroll UP/DOWN to highlight "Connect"
4. Press RIGHT to select this menu
5. Scroll UP/DOWN to highlight the desired option and RIGHT to select
Wifi (WPS): put your router into WPS discovery mode for auto pairing of the Selekt DSM
WIfi (Reset): to clear any previous Wifi settings
Bluetooth Pair: configure you Bluetooh device for pairing before selecting
Press LEFT to cancel Service menu


Alternative Wifi Setup Method via Web Browser

1. With the Selekt DSM out of Sleep mode and cable/LAN connections disconnected.
2. Go to the Wireless settings on your device (e.g. iPad)
3. Find the Selekt DSM on the list of available networks. It will be called Selekt DSM - <serial number>
4. Select this as the wireless network
5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar
6. The Selekt DSM Wifi Setup page should now be displayed
7. Select the Wifi network you want to connect to
8. Enter the passkey for the Wifi network
9. Click on 'Set Network'