Difference between revisions of "Template:Setup:Series3-Self Configure"
(Created page with ":This action will allow the Series3-301 to detect if a Series3-302 is connected and configure for Mono or Stereo mode as appropriate. :1. Connect or remove the Series3-302 spe...") |
m |
||
| Line 1: | Line 1: | ||
:This action will allow the Series3-301 to detect if a Series3-302 is connected and configure for Mono or Stereo mode as appropriate. | :This action will allow the Series3-301 to detect if a Series3-302 is connected and configure for Mono or Stereo mode as appropriate. | ||
| − | :1. Connect or remove the Series3-302 speaker as required: | + | [[Image:Series3-Configure-125px.gif|left]] |
| − | :: '''Stereo''' mode:Connect the 302 using an Exakt-link cable to the | + | <br><br><br><br><br><br> |
| − | :: '''Mono''' mode (Default on first power on): Disconnect the Series3-302 Exakt-link from the Series3- | + | :1. Connect or remove the <b>Series3-302</b> speaker as required: |
| − | :2. Press and HOLD both buttons | + | :: '''Stereo''' mode:Connect the <b>Series3-302</b> using an Exakt-link cable to the <b>Series3-302</b>, (plus Mains cable to the <b>Series3-302</b>) |
| + | :: '''Mono''' mode (Default on first power on): Disconnect the <b>Series3-302</b> Exakt-link from the <b>Series3-302</b> | ||
| + | :2. Press and HOLD both buttons [[image:PIN-1.png|35px]] & [[image:PIN-6.png|35px]] on the Series3-301 until all of the Volume indicator lights illuminate on the <b>Series3-301</b> for a few seconds and return back to volume level display. | ||
Revision as of 12:39, 18 October 2019
- This action will allow the Series3-301 to detect if a Series3-302 is connected and configure for Mono or Stereo mode as appropriate.
- 1. Connect or remove the Series3-302 speaker as required:
- Stereo mode:Connect the Series3-302 using an Exakt-link cable to the Series3-302, (plus Mains cable to the Series3-302)
- Mono mode (Default on first power on): Disconnect the Series3-302 Exakt-link from the Series3-302
- 2. Press and HOLD both buttons
& 
on the Series3-301 until all of the Volume indicator lights illuminate on the Series3-301 for a few seconds and return back to volume level display.
