Difference between revisions of "Template:Issues:Networking"
m (→Fritzboz not seeing the Linn DS/DSM products) |
m |
||
| (11 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | ===Changing to a new | + | ===Networking components=== |
| − | Some new | + | For a list of some network components you can try, check [[Network_Components|<u>HERE</u>]]<br><br> |
| − | Your PC laptop will work on this | + | |
| + | ===Changing to a new router the Linn DS will no longer connect=== | ||
| + | Some new routers, such as <b>Talk Talk</b>, have network sockets that only support 1000-BaseT connections. Linn DS products support a maximum 100-BaseT connection. <br> | ||
| + | Your PC laptop will work on this router socket as your PC will support 10/100/1000-BaseT connections. The simple solution or test is to add a low-cost network switch that supports 10/100/1000 Base-T connections, such as a Netgear GS205, between the router and the DS. | ||
| + | <br><br> | ||
| + | If you are using a <b>BT Home Hub</b> your BT Smart Hub is automatically set to Mode 1. This can cause some connectivity issue due to "Power saving" mode. We suggest that this is set to Wireless Mode <big><b>3</b></big> | ||
<br> | <br> | ||
| − | === | + | ===Fritzbox not seeing the Linn DS/DSM products === |
Fritzbox reported having issues with Apple broadcasts and losing connections. | Fritzbox reported having issues with Apple broadcasts and losing connections. | ||
| Line 21: | Line 26: | ||
<br><br><br><br><br><br> | <br><br><br><br><br><br> | ||
<br><br><br><br><br><br> | <br><br><br><br><br><br> | ||
| + | |||
| + | ===TECHNICOLOR TG799 not seeing Linn DS/DSM products=== | ||
| + | <b><u>Technicolor firmware V18.1</u></b> does not see any Linn DS/DSM products. We suspect that your Internet Service Provider has recently upgraded your Router from V17.1 to V18.1. | ||
| + | Please contact your ISP and get them to revert the Technicolor Router back to <u>Firmware V17.1</u> | ||
| + | |||
| + | ===MESH networks=== | ||
| + | :Because of their nature mesh network, they can "pass-through" the network data adding latency to the data packets each time. As the Linn DS/DSM discovery is using UPnP protocol this latency may cause the loss of Linn DS/DSM discovery. | ||
| + | : Please make sure that your MESH network can support UPnP and mDSN discovery to find the Linn DS/DSM products. | ||
Latest revision as of 11:10, 1 June 2022
Contents
Networking components
For a list of some network components you can try, check HERE
Changing to a new router the Linn DS will no longer connect
Some new routers, such as Talk Talk, have network sockets that only support 1000-BaseT connections. Linn DS products support a maximum 100-BaseT connection.
Your PC laptop will work on this router socket as your PC will support 10/100/1000-BaseT connections. The simple solution or test is to add a low-cost network switch that supports 10/100/1000 Base-T connections, such as a Netgear GS205, between the router and the DS.
If you are using a BT Home Hub your BT Smart Hub is automatically set to Mode 1. This can cause some connectivity issue due to "Power saving" mode. We suggest that this is set to Wireless Mode 3
Fritzbox not seeing the Linn DS/DSM products
Fritzbox reported having issues with Apple broadcasts and losing connections. This appear to be due to the Fritzbox monitoring the LAN sockets and shutting down anything that is not active and going into Green (power saving) mode. The manufacturer has reported the following fix: 1. Open a web browser and enter "fritz.box" into the address bar to open the router's configuration page 2. Go in to advanced/expert mode, rather than Wizard mode 3. Go to the "System > Energy Monitor > Settings" pane 4. Set the LAN port that the DS is plugged into to be "always active" 5. Click the "Apply" button
TECHNICOLOR TG799 not seeing Linn DS/DSM products
Technicolor firmware V18.1 does not see any Linn DS/DSM products. We suspect that your Internet Service Provider has recently upgraded your Router from V17.1 to V18.1. Please contact your ISP and get them to revert the Technicolor Router back to Firmware V17.1
MESH networks
- Because of their nature mesh network, they can "pass-through" the network data adding latency to the data packets each time. As the Linn DS/DSM discovery is using UPnP protocol this latency may cause the loss of Linn DS/DSM discovery.
- Please make sure that your MESH network can support UPnP and mDSN discovery to find the Linn DS/DSM products.
