Difference between revisions of "Third party control solutions"
(→UPnP ethernet control) |
(→TELNET ethernet control with LPEC protocol) |
||
| Line 21: | Line 21: | ||
==TELNET ethernet control with LPEC protocol== | ==TELNET ethernet control with LPEC protocol== | ||
| + | This can be simple way to control the Linn DS/DSM using AMX/Crestron etc.<br> | ||
| + | All that is required is a TELNET port open to the Linn DS. This will allow you to control and get feedback as if you were controlling the LInn DS/DSM using UPnP.<br> | ||
| + | |||
| + | |||
| + | Check [http://docs.linn.co.uk/wiki/index.php/Developer:LPEC LPEC] for information | ||
Revision as of 15:44, 21 November 2013
Contents
RS232
There is NO RS232 control functionality with the Linn DS products.
The RS232 sockets on the Linn DS back panel are to allow the Linn DS to control external products, not the other way around.
Front panel control
This typically called "digit"(anatomy) control the Linn DS/DSM front panel buttons (on the Majik & Akurate Products
IR control
These products can be controlled by Philips RC5 command codes.
This is standard pre-amplifer (0x10), CD (0x14) & DVD (0x19) commands
These are listed Here
The Linn DSM external inputs are selected by 3off discrete codes. Details are listed here
UPnP ethernet control
By default the Linn DS/DSM is controlled by UPnP.
This can work as a standard UPnPAv device or a Playlist device. Software such as Device spy can assist in the commands and format of these commands.
TELNET ethernet control with LPEC protocol
This can be simple way to control the Linn DS/DSM using AMX/Crestron etc.
All that is required is a TELNET port open to the Linn DS. This will allow you to control and get feedback as if you were controlling the LInn DS/DSM using UPnP.
Check LPEC for information
