Difference between revisions of "Songcast"

From LinnDocs
Jump to: navigation, search
(SongCast Trouble shooting)
(Known issue with Songcast V4.3.3.)
Line 44: Line 44:
  
 
=== Known issue with Songcast V4.3.3. ===
 
=== Known issue with Songcast V4.3.3. ===
 +
* If you have 2 or more DS's make sure that they have different ROOM names
 
* It has been noted on some PC's/MAC, that selecting the DS within Songcast causes the indicator to keep spinning and not connect to the Linn DS.
 
* It has been noted on some PC's/MAC, that selecting the DS within Songcast causes the indicator to keep spinning and not connect to the Linn DS.
 
As a first check:
 
As a first check:

Revision as of 15:39, 21 December 2012

How to Songcast

Initial Setup

  • Your DS must be running Davaar 1 firmware or higher.
  • You will require a Davaar compatible Linn Konfig to update and configure your DS
  • You will require Davaar compatible control software to control your DS

Using Kinsky

  • Insure you have installed Kinsky Davaar
  • Select the Songcast source on a DS (similar to Playlist or Radio)
  • Select the Songcast sender from the list that you wish to listen to

Using the handset (REM 019)

  • Configure each Songcast sender in your home to have a unique preset number using Linn Konfig.
  • Select the Songcast source on a DS (GOTO/Sat button will select the source directly)
  • Enter the preset number that corresponds to the Songcast sender you wish to listen to

SONGCAST Soundcard on a PC/MAC

You can broadcast the audio that is playing on your PC/MAC to your Linn DS by using the software listed Here

This audio is broadcast from your PC/MAC as dictated by your computers audio sub-system. For Windows7 this is typically 44.1k/16bit and for a OSX Lion 44.1k/24bit.

SongCast Trouble shooting

  • If you have two or more DS's in the same system make sure that each DS has it own Room name. E.g. if you have 2 DS's with the name Main, then Songcast doesn't know which one to send it to. So check the Room names first
  • Some firewalls will block any Songcast broadcast is you are on a Public network. on Windows7, click on your Control panel "Network and Internet" - "View network status and tasks" and make sure that you active network is either Domain, Private or work and NOT PUBLIC (Instructions on how to change Network type)


  • Check that you have the streaming option enabled on you Windows7
Control panel
"Network sharing center" -
"Change advanced sharing settings"
Select your network type "Home or Work", "Public" or "Domain"
Media Streaming - Choose Media Streaming options and select "Allow All"
and OK exit out of these options


  • Audio muting when playing from the PC/MAC songcast
if you are connecting the PC using a Wireless connection this may be intermittently loosing connection. This may be causing the muting as the DS is waiting for the Music stream.

Check

  1. That your Wireless connection, try one of these Network apps to find out what is interfering with your Wifi*
  2. In the PC/MAC Songcast app, go into Advanced settings and increase the Audio Latency, this is typically 300mS, try increasing this to 1000 (maximum 2000) to see if this improves things (This will allow the network to catch up on any lost information if the Songcast is setup for Unicast broadcasts)

Known Issues with Songcast V4.10

  • If you have a PC name with non-ASCII characters (accented characters etc), the Songcast PC/MAC could not connect to and keeps on attemping to connect. Try to rename your PC/MAC using a,b,c,.. 1,2,3... etc, this should now allow your PC to connect to the DS

Known issue with Songcast V4.3.3.

  • If you have 2 or more DS's make sure that they have different ROOM names
  • It has been noted on some PC's/MAC, that selecting the DS within Songcast causes the indicator to keep spinning and not connect to the Linn DS.

As a first check:

    • Select the Songcast options:
    • Select Advanced tab, and check that the Network settings - connection is correct
    • Select the General Tab and Refresh the Songcast Receiver section
      • Then reselect your Linn DS
    • Close this and retry your DS connection

If this has the same result download V4.3.2 and install from this site