Difference between revisions of "NetworkPreampConfiguration"
(→Delay Presets) |
(→Source Unity Gain) |
||
| (15 intermediate revisions by one other user not shown) | |||
| Line 5: | Line 5: | ||
=Control Settings= | =Control Settings= | ||
| − | Control settings relate to properties that may be modified by a user on a regular basis (e.g '''Volume'''). These settings are typically adjusted using a control point application such as '''KinskyDesktop'''. | + | Control settings relate to properties that may be modified by a user on a regular basis (e.g '''Volume'''). These settings are typically adjusted using a control point application such as '''KinskyDesktop''', or through the front panel using the product's IR handset. |
==Standby== | ==Standby== | ||
| Line 26: | Line 26: | ||
==Delay== | ==Delay== | ||
| − | Delay is the time in milliseconds (ms) that the output audio is delayed relative to the input audio. It can be set to any value between 50 and 2000. Delay can only be adjusted when it is enabled. Delay is only enabled if the [[#Source Video | '''Source Video''']] property set to true for that source. | + | Delay is the time in milliseconds (ms) that the output audio is currently delayed relative to the input audio. It can be set to any value between 50 and 2000. Delay can only be adjusted when it is enabled. Delay is only enabled if the [[#Source Video | '''Source Video''']] property set to true for that source. |
| + | |||
| + | ==Delay Preset== | ||
| + | Linn preamps support five delay presets, allowing five different delay values to be configured. Only one delay preset is active at any given time. '''Delay Preset''' is the currently selected (active) preset. When '''Delay Preset''' is changed, the delay setting of the new preset is automatically applied. | ||
=Configuration Settings= | =Configuration Settings= | ||
| Line 32: | Line 35: | ||
==Name== | ==Name== | ||
| − | This is the name shown by the device when it appears | + | This is the name shown by the device when it appears in a list of devices in a configuration or control point application. |
==Room== | ==Room== | ||
| Line 65: | Line 68: | ||
===Source Unity Gain=== | ===Source Unity Gain=== | ||
| − | Source Unity Gain determines whether audio from the source should be affected by the volume settings of the preamp. It can be set to true or false. When set to '''true''', the audio will be output at '''unity gain volume''' (output volume = input volume) and adjusting the preamp volume will have no effect while that particular source is active (selected). All preamp sources have the '''Source Unity Gain''' property. | + | Source Unity Gain determines whether audio from the source should be affected by the volume settings of the preamp. It can be set to true or false. When set to '''true''', the audio will be output at '''unity gain volume''' (output volume = input volume) and adjusting the preamp volume will have no effect while that particular source is active (selected). All preamp sources have the [http://docs.linn.co.uk/wiki/index.php/Unity_Gain '''Source Unity Gain'''] property. |
===Source Volume Offset=== | ===Source Volume Offset=== | ||
| Line 71: | Line 74: | ||
===Source Video=== | ===Source Video=== | ||
| − | Source Video allows the user to specify that the audio from the source originates from a video device (DVD, set top box etc). It can be set to true or false. When set to '''true''' the audio can be '''delayed''' if necessary when that particular source is active. On an analogue source this setting will cause the audio to be '''digitised'''. Note: '''a minimum delay of 50ms will be applied when this setting is enabled'''. All preamp sources have the '''Source Video''' property. | + | Source Video allows the user to specify that the audio from the source originates from a video device (DVD, set top box etc). It can be set to true or false. When set to '''true''' the audio can be '''delayed''' if necessary when that particular source is active. On an analogue source this setting will cause the audio to be '''digitised'''. Note: '''a minimum delay of 50ms will be applied when this setting is enabled'''. All preamp sources have the '''Source Video''' property (except pure analogue preamps). |
===Source Adc Attenuate=== | ===Source Adc Attenuate=== | ||
| Line 77: | Line 80: | ||
== Delay Presets== | == Delay Presets== | ||
| − | + | Each '''Delay Preset''' has three configurable properties; '''Name''', '''Visible''' and '''Delay'''. | |
===Delay Preset Name=== | ===Delay Preset Name=== | ||
| + | This is the name of the preset as it appears on the front panel of the device or in the list of presets displayed in a list of configuration parameters. | ||
| + | |||
===Delay Preset Visible=== | ===Delay Preset Visible=== | ||
| + | Delay Preset Visible determines whether the preset should appear in preses list on the control point or when browsing through presets on the front panel. It can be set to true or false. When set to false, the preset is hidden from view. It is used to temporarily remove presets that are not being used. | ||
| + | |||
===Delay Preset Delay=== | ===Delay Preset Delay=== | ||
| + | Delay Preset Delay is the delay value, in milliseconds, that should be applied when a preset is selected (active). Although this is a configuration property, the delay of a specific preset can also be changed using using a control point or the front panel, by activating that preset then adjusting the current delay. | ||
Latest revision as of 08:36, 14 October 2011
Contents
Introduction
This page describes in detail each of the user settings available on all Linn networked preamplifiers. Certain settings may not be available on all preamps, depending on the features supported by specific product models. Available features are indicated in the product specific documentation for each preamp.
User settings are divided into two categories, Control and Configuration.
Control Settings
Control settings relate to properties that may be modified by a user on a regular basis (e.g Volume). These settings are typically adjusted using a control point application such as KinskyDesktop, or through the front panel using the product's IR handset.
Standby
This is the standby state of the device. It can be set to true or false. When set to true the preamp enters a reduced power mode and an all output channels are silenced (muted).
Current Source
Current Source is the source that is currently selected (active) on the preamp. When Current Source is changed the volume automatically ramps down then ramps back up once the new source has been activated. This is to prevent any audible glitches on the output channels.
Volume
Volume is the master volume setting of the preamp. It can be set to any value between 0 and the value specified in the Volume Limit configuration parameter. A volume setting of 80 is equivalent to unity gain (output volume = input volume).
Mute
Mute is used to silence all audio output channels. It can be set to true or false. When set to true, the output channels are silenced.
Balance
Balance is the volume bias between the left and right channels of the preamp. It can be set to any value between -15 and +15. Negative values will produce a bias towards the left channels. Positive values will produce a bias towards the right channels. Setting the Balance to -15 (extreme left) will cause the right channels to be muted. Setting the Balance to +15 (extreme right) will cause the left channels to be muted.
Fade
Balance is the volume bias between the front and rear channels of the preamp. It can be set to any value between -15 and +15. Negative values will produce a bias towards the rear channels. Positive values will produce a bias towards the front channels. Setting the Fade to -15 (extreme rear) will cause the front channels to be muted. Setting the Fade to +15 (extreme front) will cause the rear channels to be muted. Linn Preamps that do not feature rear channel outputs have maximum and minimum Fade values of 0 that prevents Fade adjustment.
Delay
Delay is the time in milliseconds (ms) that the output audio is currently delayed relative to the input audio. It can be set to any value between 50 and 2000. Delay can only be adjusted when it is enabled. Delay is only enabled if the Source Video property set to true for that source.
Delay Preset
Linn preamps support five delay presets, allowing five different delay values to be configured. Only one delay preset is active at any given time. Delay Preset is the currently selected (active) preset. When Delay Preset is changed, the delay setting of the new preset is automatically applied.
Configuration Settings
Configuration settings relate to properties that are normally only modified occasionally (e.g Source Name). These settings are typically adjusted using an application aimed specifically at configuration such as Konfig.
Name
This is the name shown by the device when it appears in a list of devices in a configuration or control point application.
Room
This is the name of the room that the device is assigned to. A number of devices can can be grouped into the same room by giving them the same room name.
Volume Limit
Volume Limit is the upper limit imposed on the master volume of the preamp. Volume Limit can be set to any value between 0 and 100.
Startup Volume Enabled
Startup Volume Enabled is used in conjunction with the parameter Startup Volume to determine the volume when the preamp is brought out of standby. It can be set to true or false. When set to true the volume will automatically revert to the value of Startup Volume. When set to false the volume will automatically revert to its previous value (ie the volume prior to entering standby).
Startup Volume
Startup Volume is used in conjunction with the parameter Startup Volume Enabled to determine the volume when the preamp is brought out of standby. It can set to any value in the range 0 to 100. Provided Startup Volume Enabled is set to true, the volume will revert to the value of Startup Volume when the preamp is brought out of standby. Note: if Startup Volume is greater than the Volume Limit property, the value of Volume Limit will be applied instead.
Startup Source Enabled
Startup Source Enabled is used in conjunction with the parameter Startup Source to determine which source is selected when the preamp is brought out of standby. It can be set to true or false. When set to true the source specified in Startup Source will automatically be selected. When set to false the previous source will automatically be selected (ie the source that was active prior to entering standby).
Startup Source
Startup Source is used in conjunction with the parameter Startup Source Enabled to determine which source is selected when the preamp is brought out of standby. Provided Startup Source Enabled is set to true, the source specified in Startup Source will automatically be selected.
Headphone Volume Offset
Headphone Volume Offset is used to specify a small offset to be applied to the volume when a the headphones are activated. It can be set to any value between -15 and +15. Negative values cause the volume to be reduced. Positive values cause the volume to be increased. This property is used to normalise the effects of jumps in the output volume, when changing between the main outputs and the headphones caused by differences in the output levels of different headphone models. Note: Headphone Volume Offset adjustments are not reflected in the displayed value of the Volume property.
Sources
Every preamp has a number of sources. Each source has a number of parameters. Some source parameters, such as Source Name, exist on every source. Other source parameters only exist on certain types of sources, such as Source Adc Attenuate.
Source Name
This is the name of the source as it appears on the front panel of the device or in the list of sources displayed in a control point. All sources have the Source Name property.
Source Visible
Source Visible determines whether the source should appear in source lists on the control point or when browsing through sources on the front panel. It can be set to true or false. When set to false, the source is hidden from view. It is used to temporarily remove sources that are not being used. All sources have the Source Visible property.
Source Unity Gain
Source Unity Gain determines whether audio from the source should be affected by the volume settings of the preamp. It can be set to true or false. When set to true, the audio will be output at unity gain volume (output volume = input volume) and adjusting the preamp volume will have no effect while that particular source is active (selected). All preamp sources have the Source Unity Gain property.
Source Volume Offset
Source Volume Offset is used to specify a small offset to be applied to the volume when a particular source is selected. It can be set to any value between -15 and +15. Negative values cause the volume to be reduced. Positive values cause the volume to be increased. This property is used to normalise the effects of jumps in the output volume, when changing between sources, caused by differences in the output levels of the connected source devices. Note: Source Volume Offset adjustments are not reflected in the displayed value of the Volume property.
Source Video
Source Video allows the user to specify that the audio from the source originates from a video device (DVD, set top box etc). It can be set to true or false. When set to true the audio can be delayed if necessary when that particular source is active. On an analogue source this setting will cause the audio to be digitised. Note: a minimum delay of 50ms will be applied when this setting is enabled. All preamp sources have the Source Video property (except pure analogue preamps).
Source Adc Attenuate
Source Adc Attenuate allows the volume of an input to the analogue to digital converter (ADC) to be reduced by a small amount when a particular source is selected. It can be set to a number of different values (-12dB, -9dB, -6dB, -3dB, 0dB). It is used to prevent distortion caused by saturating the input of the ADC. This setting only affects digitised analogue inputs. The effects of ADC attenuation will not be heard on the variable analogue outputs of the preamp since an equivalent gain is automatically applied to these outputs to compensate.
Delay Presets
Each Delay Preset has three configurable properties; Name, Visible and Delay.
Delay Preset Name
This is the name of the preset as it appears on the front panel of the device or in the list of presets displayed in a list of configuration parameters.
Delay Preset Visible
Delay Preset Visible determines whether the preset should appear in preses list on the control point or when browsing through presets on the front panel. It can be set to true or false. When set to false, the preset is hidden from view. It is used to temporarily remove presets that are not being used.
Delay Preset Delay
Delay Preset Delay is the delay value, in milliseconds, that should be applied when a preset is selected (active). Although this is a configuration property, the delay of a specific preset can also be changed using using a control point or the front panel, by activating that preset then adjusting the current delay.
