Difference between revisions of "Akurate DSM"

From LinnDocs
Jump to: navigation, search
(Back Panel Connections)
(Back Panel Connections)
Line 49: Line 49:
 
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier with balanced (XLR) inputs.
 
# '''ANALOGUE OUTPUTS''' (XLR,variable level) - To connect to a preamplifier with balanced (XLR) inputs.
 
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
 
# '''ANALOGUE OUTPUTS''' (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
# '''ANALOGUE OUTPUTS''' (RCA, fixed level) - To connect to an analogue recording device with unbalanced (RCA) inputs.
 
 
# '''SPDIF INPUTS'''
 
# '''SPDIF INPUTS'''
 
# '''SPDIF OUTPUT'''
 
# '''SPDIF OUTPUT'''

Revision as of 11:21, 13 October 2011

AkurateKontrolFrontTop.jpg

Product info

  • Product Name: Akurate DSM
  • Date of Introduction: November 2011
  • Type: Integrated Digital Music player and Pre-amplifier

Latest software

Latest software releases

Open source software

Manuals

Linn Konfig manual

Kinsky Desktop manual

DSM Remote control manual

Generic Safety Information

On-line warranty registration

Network Setup

Back Panel Connections

Akurate DSM rear2.jpg
  1. MAINS INPUT - To connect to the mains electricity supply.
  2. FALLBACK - To put the device into Fallback mode (used when reprogramming).
  3. ETHERNET - To connect to a network.
  4. ANALOGUE INPUTS (XLR, line level) - To connect sources with balanced (XLR) outputs.
  5. ANALOGUE INPUTS (RCA, phono/line level) - To connect a turntable or line level source with unbalanced (RCA) outputs.
  6. PHONO GROUND - To connect to a turntable grounding terminal.
  7. ANALOGUE OUTPUTS (XLR,variable level) - To connect to a preamplifier with balanced (XLR) inputs.
  8. ANALOGUE OUTPUTS (RCA, variable level) - To connect to a preamplifier with unbalanced (RCA) inputs.
  9. SPDIF INPUTS
  10. SPDIF OUTPUT
  11. TOSLINK INPUTS
  12. TOSLINK OUTPUT
  13. HDMI INPUTS
  14. HDMI OUTPUT
  15. EARTH GROUND - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.


Front Panel Connections

Akurate DSM front.jpg
  1. MUTE BUTTON - Mutes/unmutes the audio
  2. VOLUME ADJUST BUTTONS - Changes the volume up/down
  3. SOURCE SELECT BUTTONS - Changes to the previous/next source
  4. SLEEP BUTTON - Brings the unit in/out of sleep mode
  5. FRONT PANEL DISPLAY
  6. HEADPHONE OUTPUT - To connect to stereo headphones with a 3.5mm input
  7. AUX SOURCE INPUT - To connect to a stereo audio source with a 3.5mm output
  8. POWER SWITCH- Switches the power on/off


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

  • Unpacking - Please read the information on unpacking your Akurate DSM.
  • Positioning - Please read the information on positioning your Akurate DSM.


For further assistance, try our customer support pages or the Linn Forum.