Difference between revisions of "NetworkPreampConfiguration"
(→Source Visble) |
(→Name) |
||
| Line 18: | Line 18: | ||
==Name== | ==Name== | ||
| + | This is the name of the device as it appears when queried on the network. | ||
| + | |||
==Room== | ==Room== | ||
==Source Name== | ==Source Name== | ||
Revision as of 15:16, 16 December 2010
Contents
- 1 Introduction
- 2 Control Settings
- 3 Configuration Settings
- 3.1 Name
- 3.2 Room
- 3.3 Source Name
- 3.4 Source Visible
- 3.5 Source Unity Gain
- 3.6 Source Volume Offset
- 3.7 Source Video
- 3.8 Source Adc Attenuate
- 3.9 Source Name
- 3.10 Volume Limit
- 3.11 Startup Volume
- 3.12 Startup Source
- 3.13 Headphone Volume Offset
- 3.14 Delay Preset Name
- 3.15 Delay Preset Visible
- 3.16 Delay Preset Delay
- 3.17 Startup Source
- 3.18 Startup Source
Introduction
This page describes in detail each of the user settings available on all Linn network preamplifiers. Certain settings may not be available on all preamps, depending on the features supported by specific product model. Available features are indicated in the product specific documentation.
User settings are divided into two categories, Control and Configuration.
Control Settings
Control settings relate to properties that may typically be modified by a user on a regular basis (e.g Volume). These settings are typically adjusted using a control point application such as KinskyDesktop.
Standby
Volume
Balance
Fade
Delay
Mute
Current Source
Configuration Settings
Configuration settings relate to properties that are normally only modified occasionally (e.g Source Name). These settings are typically adjusted using an application aimed specifically at configuration such as Konfig.
Name
This is the name of the device as it appears when queried on the network.
