Template:Setup:MajikDSM 2025-Bluetooth

Bluetooth & Wifi

Setting up Bluetooth or Wi-Fi using the top dial

1. With the Selekt DSM out of Sleep mode

2. Press dial UP to enter the Service menu

3. Scroll UP/DOWN to highlight "Connect"

4. Press RIGHT to select this menu

5. Scroll UP/DOWN to highlight the desired option and RIGHT to select

Wi-Fi (WPS): put your router into WPS discovery mode for auto-pairing of the Selekt DSM

Wi-Fi (Reset): to clear any previous Wi-Fi settings, or

Bluetooth Pair: configure your Bluetooth device for pairing before selecting

Press LEFT to cancel Service menu

Alternative Wi-Fi Setup Method via Web Browser

1. With the Linn DSM out of Sleep mode and cable/LAN connections disconnected.

2. Go to the Wireless settings on your device (e.g. iPad)

3. Find the Selekt DSM on the list of available networks. It will be called <XYX> DSM - <serial number>

4. Select this as the wireless network

5. Now open a web browser on your device and type "https://setup.linn.co.uk" in the address bar

6. The Selekt DSM Wi-Fi Setup page should now be displayed

7. Select the Wi-Fi network you want to connect to

8. Enter the passkey for the Wi-Fi network

9. Click on 'Set Network'

Note: If you cannot get any page from "https://setup.linn.co.uk", this may be due to added security on your phone/tablet. Check that the:

• VPN is disabled on your phone or tablet
• Go to Settings > WiFi > Select the Unsecured Network. Then tap the “i” next to that Wi-Fi network you’re trying to log in to and toggle OFF both “Auto-Join” and “Auto-Login.”
• Disable Location Services for Wi-Fi System Services for iPhone/iPad

1. Go to Settings > Privacy > Location Services iOS system services for location and privacy settings
2. Tap on System Services near the bottom of this page
3. Locate "Wi-Fi Networking" or "Networking & Wireless" and toggle it OFF
4. Retry the connection to "https://setup.linn.co.uk"
5. This is extra network security and recommend that it is turned back ON after setting up the Linn DSM.