Difference between revisions of "FAQ:Apple USB"
m (→Using the Linn USB-B socket with iPhone/iPad) |
m (→Check that the USB Accessories have been enabled) |
||
| Line 26: | Line 26: | ||
===If you have any difficulties getting audio check=== | ===If you have any difficulties getting audio check=== | ||
==== Check that the USB Accessories have been enabled==== | ==== Check that the USB Accessories have been enabled==== | ||
| − | :::* Go to <b>Settings</b> >> <b>Sounds</b> >> <b>USB Audio Accessories</b> | + | :::* Go to <b>Settings</b> >> <b>Sounds</b> >> <b>Headphone Safety</b> >> <b>USB Audio Accessories</b> |
::::<b>Make sure "Connected to Headphones is <b>ENABLED</b></b> | ::::<b>Make sure "Connected to Headphones is <b>ENABLED</b></b> | ||
::::If you have set the USB connection to "Other Devices" instead of headphones, then you will need to go into this setup each time you connect the Linn DSM. | ::::If you have set the USB connection to "Other Devices" instead of headphones, then you will need to go into this setup each time you connect the Linn DSM. | ||
::[[image:Apple-USB-Sounds2.png | link = | 700px | Centre]] | ::[[image:Apple-USB-Sounds2.png | link = | 700px | Centre]] | ||
<br><br><br> | <br><br><br> | ||
| + | |||
====If you have only set the Linn DSM as an "Other Device"==== | ====If you have only set the Linn DSM as an "Other Device"==== | ||
:::::# Unplug the USB cable, | :::::# Unplug the USB cable, | ||
Revision as of 09:41, 15 January 2025
Contents
Using the Linn USB-B socket with iPhone/iPad
First connection
- The first time you connect the USB cable from the Linn DSM you will get the message.
- Click on HEADPHONES. (If you click "Other Device" accidentally, you can clear this setting. This is shown later in this page)k.
- Click on HEADPHONES. (If you click "Other Device" accidentally, you can clear this setting. This is shown later in this page)k.
- When you now swipe down to access the "Control Centre", you will see the Linn DS listed as the Headphones
Volume controls
- There are two volume controls in operation in this setup. The Linn DSM volume control and the iPad/iPhone volume control. The Linn DSM is the MASTER volume and this governs the maximum volume level from the Linn DSM, (the iPhone/iPad volume works within the Linn DSM volume.)
- We would recommend that the iPhone/iPad is kept at maximum volume level and only use the Linn DSM volume control. This is because the iPad/iPhone volume control is very course, with only 18 volume steps from minimum to maximum.
- If you get no audio from the Linn DSM first check that its volume level is a reasonable level, e.g. 60-65. Then increase the volume level of you iPhone/iPad.
If you have any difficulties getting audio check
Check that the USB Accessories have been enabled
- Go to Settings >> Sounds >> Headphone Safety >> USB Audio Accessories
- Make sure "Connected to Headphones is ENABLED
- If you have set the USB connection to "Other Devices" instead of headphones, then you will need to go into this setup each time you connect the Linn DSM.
If you have only set the Linn DSM as an "Other Device"
- Unplug the USB cable,
- Press "Forget All USB Audio Accessories"
- Reconnect the USB connection and now select Headphones.
Check the EQ settings are disabled
- Go into iPhone/iPad settings,
- Go to Apps >. Music
- Turn EQ OFF
