Difference between revisions of "Technical Specification:Selekt DSM"

From LinnDocs
Jump to: navigation, search
m
m
Line 2: Line 2:
 
<!--Top Row-->
 
<!--Top Row-->
 
|-
 
|-
−
|  width="20%" align="center" |  
+
|  bgcolor="#cccccc" width="20%" align="center" |  
  
 
| bgcolor="#cccccc" width="80%" align="center" |  
 
| bgcolor="#cccccc" width="80%" align="center" |  
−
'''''Linn Selekt DSM (without Modules)'''''
+
'''''Linn Selekt DSM '''''
 
|-
 
|-
 
<!--Spec rows, make sure top top row columns match spec row colums-->
 
<!--Spec rows, make sure top top row columns match spec row colums-->
Line 101: Line 101:
 
:
 
:
 
|-
 
|-
−
||3
+
||
 +
:
 +
;1.1 channel pre and power amplifier cartridge for Linn Selekt DSM -
 +
::This is a module with
 +
:::* Single line-level audio channel with 2off RCA sockets sharing the same single feed. (e.g. Subwoofer)
 +
and
 +
::: * Single Class-D Power Amplifier channel with 4mm/Banana/Binding post terminals. (e.g.Centre channel speaker)
 +
 
 +
;{{tab}}Line Analogue Output:
 +
:{{tab}}{{tab}} RCA - 2V rms, 300Ω
 +
 
 +
;{{tab}}Power Amplifier output power:
 +
:{{tab}}{{tab}} 100W  /channel into 4Ω load,
 +
:{{tab}}{{tab}} 50W / channel into 8Ω load
 +
:
 +
:{{tab}}{{tab}} THD+N: {{tab}}0.001% {{tab}}Dynamic Range {{tab}}110dB{{tab}}Gain:{{tab}}20dB
 +
:
 +
;{{tab}}Digital to Analogue Convertor (DAC)
 +
:{{tab}}Stereo Standard DAC module or <br>
 +
:{{tab}}Stereo <u>Katalyst</u> DAC module
 +
:
 
|-
 
|-
 
||4
 
||4
  
 
|}
 
|}

Revision as of 11:14, 20 August 2019

Linn Selekt DSM

Overview Integrated digital music player and preamplifier with selektable cartridge options.
Date of introduction September 2018
Dimensions

(H) 113 mm x (W) 350 mm x (D) 350 mm
(H) 4.45 inches x (W) 13.8 inches x (D) 13/8 inches

Weight 7.2 kg / 15.9 lb
Mains supply voltage (auto ranging)
100–120 V ac (±10%) 50–60 Hz
200–240 V ac (±10%) 50–60 Hz
Supported file types FLAC, WAV, MP3, AAC, AIFF/AIFC, ALAC, OGG/VORBIS, WMA, DSD (DSF and DFF)
Audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k,29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
Word depths 16–24 bits
Control protocol Compatible with UPnP™ media servers, UPnP™ AV 1.0 control points
inputs

1off Ethernet

1off HDMI ARC

1off RCA Line level,
Input sensitivity Selectable: 1 / 2 / 4 Vrms
Input impedance - 50 kΩ
1off MM Phono,
max voltage (1kHz): 67mV rms. (Gain +40dB),
Input impedance 47kΩ, 100pf
1off MC Phono,
max voltage(1kHz): 5.5mV rms (Gain +54dB),
Input impedance 100Ω 470pf
2off Toslink
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
2off SPDIF
Support sample rates 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Nominal input voltage 0.5 V peak
1off USB Audio Class 2
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
2off Exakt-Link
Sources LAN
Internet radio
Tidal
Qobuz
Calm Radio
Spotify Connect
NetAux
Ethernet 100Base-T RJ45
3 Cartridge slots: 1
DAC's must be installed in each module
2-channel Line level analogue pre-amplifier output cartridge for Linn Selekt DSM -
This is a cartridge with 2off line-level audio channels.
Each channel has both XLR & RCA outputs that can be used simultaneously.
     Analogue Output
           RCA - 2V rms, 300Ω
           XLR - 4V rms, 600Ω
     Digital to Analogue Convertor (DAC)
     Stereo Standard DAC module       THD+N: 0.0002%      Dynamic Range 114dB      or
     Stereo Katalyst DAC module       THD+N: 0.0002%      Dynamic Range 117dB
2-channel power amplifier cartridge for Linn Selekt DSM -
This is a module with 2off Class-D Power Amplifier channels
Each channel uses 4mm/Banana/binding post terminals
     Max output power
           100W /channel into 4Ω load,
           50W / channel into 8Ω load
           THD+N:      0.001%      Dynamic Range      110dB     Gain:     20dB
     Digital to Analogue Convertor (DAC)
     Stereo Standard DAC module or
     Stereo Katalyst DAC module
1.1 channel pre and power amplifier cartridge for Linn Selekt DSM -
This is a module with
  • Single line-level audio channel with 2off RCA sockets sharing the same single feed. (e.g. Subwoofer)

and

* Single Class-D Power Amplifier channel with 4mm/Banana/Binding post terminals. (e.g.Centre channel speaker)
     Line Analogue Output
           RCA - 2V rms, 300Ω
     Power Amplifier output power
           100W /channel into 4Ω load,
           50W / channel into 8Ω load
           THD+N:      0.001%      Dynamic Range      110dB     Gain:     20dB
     Digital to Analogue Convertor (DAC)
     Stereo Standard DAC module or
     Stereo Katalyst DAC module
4
Retrieved from "https://docs.linn.co.uk/wiki/index.php?title=Technical_Specification:Selekt_DSM&oldid=20328"