Difference between revisions of "Template:ModuleInfo:SELEKT DSM CARTRIDGE - 1.1"
m |
m |
||
| Line 11: | Line 11: | ||
{{Info:Selekt Line&PA}} | {{Info:Selekt Line&PA}} | ||
| − | + | {{Note:SelektPA}} | |
| − | |||
| − | |||
| − | |||
Revision as of 07:25, 26 April 2019
SELEKT DSM CARTRIDGE - 1.1
Linn part# SK CHH1
This is a module with 1off RCA line-level audio channel and 1off Power Amplifier outputs.
This is designed for a Centre channel (Power Amplifier) and Sub-woofer (RCA-Line Level) connection in a Surround system
This module has a standard-level 1 Digital to Analogue Convertor on both Power Amplifier and RCA outputs .
| Line Output: | ||
| Output Level: | 2V rms @volume 80 | |
| Output Impedance: | 300Ω |
Power Amplifier Output:
- Bridged Class-D amplifier with post-filter feedback using 4mm/Banana plug terminals.
- Max output power:
- 100W/channel into 4Ω load,
- 50W / channel into 8Ω load
Note:
- An upgrade to the Selekt Power supply may be requried to use any new modules.
- Power Amplifier outputs: These are CLASS-D amplifier outputs and speakers should ONLY be connected/disconnected when the product in is Sleep state or powered OFF.
- Some Electrostatic speakers may require a modification to work with Linn Class-D amplifier. Please refer to the speaker manufacturers website for information.
- The Selekt power amplfiers have a slightly lower gain than other Linn power amplifiers, (original Majik/Akurate..). If you are going to Bi-Amp a pair of speakers then we would recommend either ALL Selekt Power amplifier cartridges or ALL Selekt Line level cartridges with external amplifiers.
