View source for MS GENERAL

{{HIDE_PAGE_TITLE}}
{{Big_Select_Button | Return to Manage Systems guide| |#B22222|white}}
<br><br>
{{:Manage_Systems_Index}}
<br><br>
__TOC__
=== GENERAL ===

{| width="100%" cellspacing="0" cellpadding="10" border="0" align="center" class="FCK__ShowTableBorders"
|-
| valign="top" bgcolor="# E0 FF FF  " |
* '''System Name''' to change Room name

[[Image:LAMS General tab.jpg|right|450px| link=]]
====<u>DEVICES</u>====
=====Network Player=====
:To get the details of your Linn DS/DSM Model name, Serial number, MAC Address, Software version (also known as Firmware) & BOARDS. (These are the circuit boards and their identification numbers.)<br>
:This will also show any Exakt products, (Loudspeakers, ExaktBoxes and Phono stage - Urika-II are connected to this Linn DS/DSM)
:Hit the <b><big>></big></b> button to change the configuration
:* If you are using a [[Selekt_DSM_/0 | <u>Selekt DSM</u>]] you can select what the cartridges will be used for
::* Stereo: Stereo if more than one cartridge then this for the Exakt crossover
::* Stereo Passthrough: If the cartridges are used for Bi-Amping or Tri-Amping
::* Surround Passthrough: To configure the cartridges for 5.1 surround, (or 7.1 with additional Exakt products)
:;Note: You may have to bring the Linn DSM out of Standby to change configuration. 
::Check the <b>Standby</b> option further down this page. Slide the button LEFT to bring the Linn DS/DSM to turn <b>STANDBY <u>OFF</u></b> and <b>PRODUCT <u>ON</u></b>
<div class="zoom_img">[[image:Kloud-Konfig_Mini_Standby.png|centre|link=|400px]]</div>
<br>


====START-UP MODE====
:A number of different settings can be applied to customise the way your device starts up

====Startup Mode==== 
:Normally, your device will power up in '''Sleep''' (aka standby). 
:Select '''Active''' to skip sleep mode and go straight to playback mode on power up

====Auto Play==== 
:Normally, you must press play to start playing audio. 
:Change this setting to '''On''' to make your device play audio immediately when a source is selected (only relevant to Playlist, Radio, and Songcast)

====Startup Source==== 
:Normally, your device will start up on the last source you were listening to. 
:You can change this setting to make sure the device starts up on a specific source instead

====Wi-Fi====
: If applicable to your Linn DSM, this will enable or disable the Wi-Fi operation of your Linn DSM.
:;Note: If you have a cable/LAN connection to your Linn DSM when first powered on, then the Wi-Fi connection will be ignored. To use the Wi-Fi connection, disconnect any LAN connections and power cycle the Linn DSM. This will then use the Wi-Fi connection. (It will have configured for your Wi-Fi first. Check your product page in this wiki for more information)

====IPv6====
: If applicable to your Linn DSM, this switch the network operation to IPv6. (It makes no difference in the sound quality, It is only to support evolving ethernet networks).

====Bluetooth====
: If applicable to your Linn DSM, this will allow your Linn DSM to <B><U><i>receive</i></u></b> Bluetooth audio. This can be from your phone, Alexa etc
:;Note: It will have paired with your Bluetooth device first. Check your product page in this wiki for more information


====Analog Input Mode====
: This is for the [[Majik_DSM_/4_(2020_Variant) | <u>Majik DSM (2020 variant)</u>]]. This allows the Analogue input to be configured as a [[Cables_%26_terminations#RCA.2FPhono|<u>Line-level input</u>]], or for a Moving Magnet turntable cartridge.


====XLR Output====
:This is for the [[Klimax_DSM_/3_(2020_Variant)|<u>Klimax DSM (2020 variant)</u>]] to enable the XLR Output

====RCA Output====
:This is for the [[Klimax_DSM_/3_(2020_Variant)|<u>Klimax DSM (2020 variant)</u>]] to enable the RCA Output

====RCA Output Transformer====
:To electrically isolate the audio on the RCA sockets

====Standby====
:This is used to remotely switch on the products and set up the Exakt products remotely
:Turn <b>ON</b> to put the product <b><u>INTO</u></b> STANDBY
:Turn <b>OFF</b> to put the product <b><u>OUT OF</u></b> STANDBY


====REBOOT DEVICE====
:Pressing this text will force the Linn DS/DSM to restart

====RESTORE FACTORY DEFAULTS====
:Pressing this reset all the settings to default. 
:Note that this will also remove this product from your Linn Account, and it will have to be reattached to your account before any further setup

:This function is also possible using the <u>[[Linn_App_Manual#Restore_a_Linn_DS.2FDSM_to_Factory_Defaults |Linn App]]</u>

====UPLOAD DEVICE LOGS====
:This is for diagnostics only and should only be used when told to by Linn personnel.

====RECOVER DEVICE FIRMWARE====
:{{BlueBox | RECOVER | #RECOVER DEVICE FIRMWARE }} : This is to reload the software in to the Linn DS/DSM. It should only be used when instructed by Linn personnel. 
<br><br><br><br>

<hr style="width:50%; margin-left:25%; margin-right:25%;">
<br><br>
[[image:LAMS-Network_player.png|left|450px | link=]]
<br><br><br><br><br><br>
:* {{BlueBox | CHANGE CONFIGURATION | #RECOVER DEVICE FIRMWARE}}: to add/remove/change your speaker definition.<br>
::'' You will need to '''REMOVE''' your existing speakers first before you can change these to a different speaker''<br>

<br><br><br><br><br><br><br><br>
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>
[[File:Kloud_-_General_-_Exakt.png|450px|right| link=]]
<br><br><br><br>

=====Exaktbox=====
:: Hit the <b><big>></big></b> button to change the configuration
:::* Under Speakers, press  <b><big>></big></b>  to change the Exakt filter profile used.
:::* {{BlueBox | CHANGE CONFIGURATION |#Exaktbox}}: to add/remove/change your speaker definition.<br>
:::* Also shows the <b><small>CONNECTION GUIDE</small></b>


<br><br><br><br><br><br><br>
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>
::<div class="zoom_img">[[File:Kloud-General-Phono Stage.png|450px|right|link=]]</div>

=====Phono Stage (Urika-II)=====
Hit the <b><big>></big></b> button to get details of the Urika-II
: Hit the <b>Cartridge </b> button to get details of the Urika-II
::This page will allow you to 
::::* Select a different cartridge - {{BlueBox | CHANGE CARTRIDGE | #Phono Stage (Urika-II)}} 
:::or
::::* Adjust the current Cartridge settings - {{BlueBox | CHANGE CONFIGURATION | #Phono Stage (Urika-II) }}
:::::: Exakt Input definition (1 or 2)
:::::: Equalisation Filter: RIAA 
:::::: Gain (dB): to adjust the photo stage gain
:::::: Input Resistance:  Resistive load presented to the cartridge
:::::: Input Capacitance: Capacitance load presented to the cartridge

<br><br><br>
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>

{{:Configuration:Change_Configuration}}
<hr style="width:50%; margin-left:25%; margin-right:25%;"><br><br>

====Test Tones/Volume Offsets====
::<div class="zoom_img">[[image:Manage_Systems-Volume_Offsets.png|300px|right| link=]]</div>
This allows you to trim the channels. Hit the Play button against each channel (marked in RED) and adjust the channel trim level.<br>


<br><br><br><br><br>

|}

==Setting up Exakt loudspeakers for first time==
{{:Manage_Systems:Speaker_setup|1= Exakt speaker(s)}}