View source for Klimax DSM-3:RCA-XLR Output toggle

:From Davaar firmware 4.81.396 (Apr 2021), you now have the ability to enable/disable the XLR and RCA analogue outputs on the Klimax DSM/3 (AV) & (Music).<br>
::For example:
:::This will allow you to have say, Loudspeakers on the XLR outputs and a headphone amplifier on the RCA outputs.(The Exakt outputs are unaffected in this setup.)
<br><br><br>
[[File:REM022_Star.png |right|200px]]
;:<u>To select the <b>Analogue Output mode</b> using the IR Handset</u>
::1. To switch between outputs press and hold * button  on the REM022 handset
:::This will then switch to the other analogue output. If currently on XLR then it will switch to RCA. If currently RCA then it switch to XLR 
::2. Press and hold * button  on the REM022 handset to switch back to the other output.

;: Konfig and Dial selection will allow you to have both XLR & RCA operational at the same time.
<br><br><br><br><br><br>

[[File:KlimaxDSM-3 Dial.jpg|right|300px]]
;:<u>To select the <b>Analogue Output mode</b> using the top dial</u>
:1. With the Klimax DSM out of Sleep mode
:2. Press dial UP to enter Service menu
:3. Scroll UP/DOWN to highlight <b>"Settings"</b>
:4. Press RIGHT to select this menu
:5. Scroll DOWN to highlight the <b>"Analog Output"</b> and RIGHT to select
:6. Use the UP/DOWN keys to select
::<b>RCA Only</b>: to only output on the RCA sockets
::<b>XLR Only</b>: to only output on the XLR sockets
::<b>Dual (XLR & RCA)</b>: to have both RCA and XLR sockets live.
::<b>Off</b>: to disable these analogue outputs.
:Press LEFT to cancel Service menu
<br><hr>