View source for Sekrit DS

[[Image:Sekrit-DS_3D.jpg‎|right|404x174px]]

== '''Product info''' ==

* ''Product Name:'' Sekrit DS (2017 / 2018 Variant)

* ''Date of Introduction:'' July 2017 - Jan 2021

* ''Type:'' Digital music player

* ''Features'' 
** [http://docs.linn.co.uk/wiki/index.php/Why_Linn_DS_is_the_best_way_to_play_CDs DS Design]

== '''Support''' ==

[http://www.linn.co.uk/support Linn Support Site]

== '''Latest software''' ==

{{General:Latest_Product_SW}}

== '''Manuals''' ==

[http://docs.linn.co.uk/wiki/index.php/Konfig_Manual Konfig manual]

{{General:Product_Manuals}}

== '''Network Setup''' ==

{{General:DS_Network_system}}

== '''Back Panel Connections''' ==

[[Image:Sneaky DS rear.jpg|center|720px]]

# {{link:MAINS INPUT}}
# '''EARTH GROUND''' - To connect to an earthing terminal if no mains earth is available or to join to the earths of other products in the system to improve performance in areas of poor/noisy electrical earth conditions.
# '''SPEAKER OUTPUTS''' - To connect to loudspeakers
# '''ANALOGUE OUTPUTS''' (RCA, variable/fixed level) - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
# '''DIGITAL OUT''' (TOSLINK) - To connect to an external DAC or computer that has a Toslink (optical) digital input.
# '''DIGITAL OUT''' (SPDIF) - To connect to an external DAC or computer that has an Spdif digital input.
# '''RC5 ACCESSORY''' - To connect to a [[ DS_Control_Options#Knekt_BASIK3_RCU | Linn BASIK3 or BASIK3-IR]] Knekt control device, (setup for RoomAmp2 connection (jumper link removed)). This requires a Knekt-CAT-5 cable to connect to the Linn DS
# '''RS232 PORTS''' - To connect to other Linn devices that don't have ethernet.
# {{link:FALLBACK}}
# {{link:ETHERNET}}

<br>

== '''Front Panel Connections''' ==

[[Image:Sekrit_DS_Black_Front.jpg|center|747px]]

Product status is indicated by the LED behind the Linn badge, default settings are shown below. <br>

'''LED OFF''' - no power <br>'''LED ON DIM''' - product in standby <br>'''LED ON BRIGHT''' - product is active <br>'''LED SLOW FLASH''' - searching for IP address (boot) <br>'''LED FAST FLASH''' - fallback (re-programme)

Note: LED may be turned off using Linn Konfig. <br><br>

== '''Installation''' ==

Please read the following carefully '''before''' installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.


* [[product_unpacking|Unpacking Information]]

* [[product_positioning|Positioning Information]]

* [[amplifier_protection|Amplifier Protection]]



== '''FAQ's''' ==
Check:
:* [[FAQ-Linn DS/DSM|'''<u>FAQ-Linn DS/DSM</u>''']] 
:* [[FAQ-Linn_DS/DSM#Linn_Sneaky_Music_DS.2FSekrit_DS|<u>'''FAQ-Sekrit Music DS'''</u>]]


For further assistance, try our [http://www.linn.co.uk/linn_customer_support customer support] pages
[[Category:Linn DS]]