View source for Template:Build Series 3 Stand

==='''Fitting the Stand'''===
:This is a accesory to Series3 that allows the loudspeaker to bolt on stand. 
:The cables can be hidden through the centre of the stand. Rubber feet, supplied, can be fitted at the bottom of the stand for added cable clearance.. 
[[image:Series3-stand.png|left|160px]]
<b><u>Install instuctions: </u></b> 

1. Have all parts ready to assemble, and a clean, soft surface to work on.

:2. Turn the stand upside-down and feed the cables you require through the stand. Pull the cables out through the hole provided at the rear of the stand.

[[image:Series3-Stand-bolt.png|right |100px]]
:3. Gently and carefully place the Series 3 speaker on its head. Line up the hole in the top of the stand with the insert in the cabinet. 
{{TAB4}} a) Take the bolt and washer and start fitting the bolt by hand to ensure you are not cross threading. <br>
{{TAB4}} b) Tighten the bolt to secure, <B>but take care not to overtighten it</b>, as this could crack the speaker cabinet.<br>

:4. Turn the stand the right way up and plug the cables into the connectors. The product is now ready to connect and install

:5. Optional rubber bump on feet can be fitted to the base if the stand is going to be used on a wooden floor, to avoid scratching. Arrange the feet equally spaced around the perimeter.