View source for Template:Setup:Series3-Self Configure

:This action will allow the Series3-301 to detect if a Series3-302 is connected and configure for Mono or Stereo mode as appropriate.
[[Image:Series3-Configure-125px.gif‎|left]]
<br><br><br><br><br><br>
:1. Connect or remove the <b>Series3-302</b> speaker as required:
:: '''Stereo''' mode:Connect the  <b>Series3-302</b> using an Exakt-link cable to the  <b>Series3-302</b>, (plus Mains cable to the  <b>Series3-302</b>)
:: '''Mono''' mode (Default on first power on): Disconnect the  <b>Series3-302</b> Exakt-link from the  <b>Series3-302</b>
:2. Press and HOLD both buttons [[image:PIN-1.png|35px]] & [[image:PIN-6.png|35px]] on the Series3-301 until all of the Volume indicator lights illuminate on the  <b>Series3-301</b> for a few seconds and return back to volume level display.