Klimax Renew DS

From LinnDocs
Revision as of 10:45, 17 August 2022 by Yoda (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
RenewDsDevice.png

Product info

  • Product Name: Renew DS
  • Date of Introduction: May 2011 - Jan 2022
  • Type: Digital music player
  • Purpose
The Klimax Renew DS was used with upgrades of existing Klimax DS products to a newer variant of this product. The circuit board that was removed from the Klimax DS was offered as an Renew package.
This Klimax Renew DS has a power supply, case and ID circuit board to match the original circuit board with its new serial number. It can only be used with the circuit board it was built for. (If used with the wrong circuit board then this can cause configuration issues.).
This Renew option saves on the disposal of the original circuit board and helps to save the Environment with Exakt and/or Katalyst upgrades.
This product is NOT designed to work with the Organik upgrades

Support

Linn Support Site

Latest software

Latest software releases

Details of latest Product release software

Manuals

Product Information / Quickstart Guide (for KlimaxDS)

Controlling the product User Guide

Product setup:Manage Systems user manual

Space Optimisation (Advanced)

Safety Information

Warranty Terms and Conditions

Third Party Software Copyright]

Network Setup

Back Panel Connections

Image:Klimax_DS_rear.jpg


  1. MAINS INPUT - To connect to the mains electricity supply.
  2. POWER SWITCH- For switching the power to the unit on and off
  3. ETHERNET - To connect to a network (100Base-T)
  4. RS232 PORTS - For connection to Linn source products without ethernet ports. Please note: Early versions on the Renew DS has RS232 port 1 & 2 labels swopped around. If you have any difficulty, please test this connection using the Konfig-Diagnostics
  5. FALLBACK - To put the device into Fallback mode (used when reprogramming)
  6. EARTH GROUND - For connecting the unit to an earthing terminal if no mains earth is available or for joining the earths of other products in the system to improve perfromance in areas of poor/noisy electrical earth conditions.
  7. UNBALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with unbalanced (RCA) analogue inputs.
  8. BALANCED OUT RIGHT, LEFT - To connect to a preamplifier (or power amplifier when internal volume control is enabled) with balanced (XLR) analogue inputs.


Front Panel Connections

Image:RenewDsDevice.png


Installation

Please read the following carefully before installing the unit in your system – your unit may need to be reconfigured by your Linn retailer.

FAQ's

Check:

General operation

This product is pre-configued, when ordered and supplied by Linn Products, to ONLY to be used with the pre-assigned Linn product.
If the wrong circuit board has been with the Renew DS then this will produce issues assigning to your Linn Account as it is giving the incorrct serial number for this product.
This product is NOT designed to work with the Organik upgrades of Klimax DS/DSM's


For further assistance, try our customer support pages